Quantcast
Channel: Gravel Archives - Cyclocross Magazine - Gravel Grinder Bikes and Races
Viewing all 832 articles
Browse latest View live

NAHBS 2019: Crumpton Cycles Custom Carbon Type 5 Disc Gravel Bike

$
0
0

Crumpton's carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

Crumpton Cycles of Austin, Texas has been making custom carbon bicycles since 2004. We first saw the company at the San Jose NAHBS in 2006 as one of the new hot builders and one of less than a handful who built with carbon at that time. A dozen years have passed and Nick Crumpton is now one of the old-guard carbon bike makers.

Crumpton certainly works the way of an old master—totally alone, one bike at a time. He said he won’t even think about the next bike until the paint is drying on the one he’s working on.

Crumpton bladder molds his own tubes, using thin sheets of unilateral pre-preg carbon fiber. He alters the shapes to meet the tube’s demand.

The tube lamination schedule varies based on factors such as frame size, rider weight and desired ride characteristics. He fabricates the dropouts and other fixtures and then builds the bike with a tube-to-tube method.

[caption id="attachment_133004" align="aligncenter" width="1140"]Nick Crumpton molds each carbon tube himself. Crumpton's carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Nick Crumpton molds each carbon tube himself. Crumpton’s carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

Crumpton paints each frame himself. If you order a complete bike, as most of his customers do, he’ll assemble the bike too.

Crumpton entered the best gravel bike category with a Type 5 Disc second-generation bike. The second generation of the model offers wider tire clearance that allows 700c x 40mm tires with relatively short 42.0cm chainstays. It can also accommodate 650b X 48mm tires.

[caption id="attachment_133001" align="aligncenter" width="1140"]Crumpton's carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Crumpton’s carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The bike was his personal ride with a frame that he claims weighs roughly 850 grams.

[caption id="attachment_132998" align="aligncenter" width="1140"]Crumpton's carbon gravel bike boasts decent tire clearance out back. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Crumpton’s carbon gravel bike boasts decent tire clearance out back. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

Crumpton outfitted the bike with Shimano Ultegra 8050 Di2, and of course, the frame has custom internal wire routing.

[caption id="attachment_132997" align="aligncenter" width="1191"]Crumpton's carbon gravel bike featured some of the cleanest internal routing we saw at the show. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Crumpton’s carbon gravel bike featured some of the cleanest internal routing we saw at the show. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

All Crumpton bikes are bespoke and you can begin your order by email or phone. Just don’t expect Nick Crumpton to answer the phone—he’s working on a bike, or out riding his own.

[caption id="attachment_132999" align="aligncenter" width="1140"]Nick Crumpton has been making custom carbon bikes for over a decade now. Crumpton's carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Nick Crumpton has been making custom carbon bikes for over a decade now. Crumpton’s carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The Type 5 Disc Frameset is $7,000, the complete bike price depends on the build, but as displayed at NAHBS with the HED Ardennes tubeless wheelset, it’s “around” $10,000.

For a closer look at the Crumpton Type 5 Disc, see the gallery below.

More info: crumptoncycles.com

Stay tuned for more handbuilt bikes from 2019 NAHBS show in Sacramento.

Photo Gallery: Crumpton Type 5 Disc Gravel Bike

Crumpton's carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

Crumpton’s carbon gravel bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

The post NAHBS 2019: Crumpton Cycles Custom Carbon Type 5 Disc Gravel Bike appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.


CXM Podcast: Kristen Legan Puts Gravel Experience to Use as a Gravel Coach

$
0
0

The descent from pit 1 became more slick as racing continued. Singlespeed Women. 2018 Cyclocross National Championships, Louisville, KY. © A. Yee / Cyclocross Magazine

When she was younger, Colorado’s Kristen Legan found herself doing a lot of triathlons. There was just one problem—she did not really like the running part.

Fortunately for her, she discovered gravel cycling. It has all the adventure and long-distance riding of the bike portion of tris without the whole running a long distance part. It was a perfect match.

“I swam Division I at the University of Pacific, and then when I moved back to Boulder, it’s kind of the hotbed of triathlons, so it kind of sucked me in with my swimming background. I got into it and raced professionally for about five years and then realized I am a terrible runner. I did not enjoy training running and I was slow.”

“I just really loved riding my bike. One summer I was out on a long bike ride and was just like, ‘Why don’t I just race bikes? I don’t need to race triathlons anymore.’ It was a great epiphany out on the bike.”

Legan and gravel ... and creek crossings ... have been a good fit. 2018 Almanzo 100 Gravel Race. © Eric Wynn

Legan and gravel … and creek crossings … have been a good fit. 2018 Almanzo 100 Gravel Race. © Eric Wynn

During the gravel offseason, Legan races cyclocross with the Bitchn Grit team. We recently profiled her custom titanium Firefly bike that she uses for both gravel and cyclocross, with a few modifications to convert between the respective seasons.

Legan races gravel and ’cross and also coaches gravel. Kristen and her partner Nick [who has also been a guest on the CXM podcast] run a gravel coaching service called Rambleur Rising.

Kristen focuses on the physiology and Nick on the process of preparing for a long day in the saddle across rough remote terrain, and together, the two prepare athletes to tackle the myriad challenges of doing gravel.

“I started coaching about 10 years ago,” Legan said. “I started a company called Rambleur Rising, and my husband Nick is also a gravel racer and a huge tech guy. We started our company based on endurance riding. We wanted to focus our company on people doing those wacky, crazy events like we do.”

I had a lot of questions for Legan about gravel coaching and what it entails, so I invited her on the podcast to talk about her coaching and her gravel riding.

You can listen to our conversation via the embed above and via our Soundcloud page and iTunes.

For past episodes, you can visit our archives.

The post CXM Podcast: Kristen Legan Puts Gravel Experience to Use as a Gravel Coach appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

NAHBS 2019: Co-Motion’s Made-in-Oregon Steelhead Tandem and Klatch Gravel Bikes

$
0
0

Co-Motion Cycles of Eugene, Oregon is best known for its tandems. There are lots of beautiful roads, paved and unpaved, in Oregon and a gravel capable tandem would be an ideal way to explore those roads with a partner.

Last year, Co-Motion introduced a limited-edition, gravel-capable aluminum tandem with a gorgeous paint job for the company’s 30th anniversary.

The Kalapuya is designed around road geometry with clearance for 700c x 45mm tires with a specially machined aluminum yoke and boost spacing. That beauty will set you back $11,000 for a complete bike set up as 2×11 with Shimano Ultegra 8000, a Gates Carbon timing belt and Rolf Hyalite carbon tandem wheels.

Steelhead Tandem

At NAHBS 2019, Co-Motion introduced the Steelhead tandem made with custom drawn and butted tubes of Reynolds 725 heat-treated chrome-moly tubing, experly fillet brazed by Co-Motion.

[caption id="attachment_133091" align="aligncenter" width="1140"]Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

If the buyer wants, the Steelhead can be TIG welded for a slightly lower cost. It has road-oriented geometry that can be customized to the buyer’s needs. It is also able to fit 700c x 45mm tires.

The Steelhead introduces Co-Motion’s new Carbon Boost fork with 15x110mm thru-axle spacing. The Steelhead comes standard with 68mm BSA threaded bottom brackets with an eccentric front hanger to tension the timing chain. BB30 or PF30 bottom brackets are an available option.

[caption id="attachment_133100" align="aligncenter" width="1140"]The tandem has a 68mm BSA threaded BB. Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The tandem has a 68mm BSA threaded BB. Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The bike was shown with an Ultegra 8000 2×11 build with Co-Motion compact tandem cranks and a standard timing chain. The wheels use custom-drilled 40-hole Astral Leviathan aluminum rims. Astral is the custom wheel component subsidiary of Rolf Prima, also located in Eugene, Oregon. The Leviathan is tubeless ready and completely manufactured in Eugene.

The show bike had WTB Riddler 45mm gravel tires mounted. The paint is Tuxedo Black metallic with a matte clear coat that offered a subtle sparkle indoors, but we’re told it is remarkable with the sun shining on it.

[caption id="attachment_133101" align="aligncenter" width="1140"]Co-Motion builds its bikes by hand in Oregon. was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine Co-Motion builds its bikes by hand in Oregon. Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The Co-Motion Steelhead as shown at NAHBS 2019 is $8,000, which includes the upcharge for the fillet brazing and custom paint. For added cost, the bike can be further upgraded with Di2 or carbon wheels if the customer desires.

One observation is the loss of the lateral tube in Co-Motion’s tandems. The lateral tube was costly and complicated in bike production. Co-Motion used a one-piece tube that was pierced at the captain’s seat tube junction.

CAD analysis led to its elimination without any ride quality deficits, according to Co-Motion. The benefit is simplified production and lighter frame weight. We’ll have to put that claim to the test.

Updated Klatch Gravel Bike

Co-Motion had more than tandems to show. In the booth we spied a custom painted Klatch gravel racing bike.

[caption id="attachment_133096" align="aligncenter" width="1140"]The Co-Motion Klatch steel gravel bike has received a few changes over the years, including increased clearance for 45mm tires and flat mount brakes. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The Co-Motion Klatch steel gravel bike has received a few changes over the years, including increased clearance for 45mm tires and flat mount brakes. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

We first saw the Klatch at NAHBS 2015. Since then, the heart of the Klatch has largely stayed the same, while some features have been updated to meet the times.

Co-Motion still builds the bike with Reynolds 853 tubing in its Oregon shop.

[caption id="attachment_133089" align="aligncenter" width="1140"]This Co-Motion Klatch steel gravel bike had a handsome metallic finish that reminded us of past Raleigh technium mountain bikes. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine This Co-Motion Klatch steel gravel bike had a handsome metallic finish that reminded us of past Raleigh technium mountain bikes. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The original bike had clearance for 700c x 40mm tires, but that room has been widened to accommodate 45mm tires. The bike has plenty of rack mounts for the adventurous sorts and continues to use front and rear thru-axles.

[caption id="attachment_133098" align="aligncenter" width="1202"]The Co-Motion Klatch steel gravel bike has received a few changes over the years, including increased clearance for 45mm tires and flat mount brakes. Need a rack or fender? Co-Motion aims to please. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The Co-Motion Klatch steel gravel bike has received a few changes over the years, including increased clearance for 45mm tires and flat mount brakes. Need a rack or fender? Co-Motion aims to please. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

For a closer look at both bikes, see the gallery below.

More info: co-motion.com

Stay tuned for more handbuilt bikes from 2019 NAHBS show in Sacramento.

Photo Gallery: Co-Motion Steel Steelhead Tandem and Klatch Gravel Bike

Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

Co-Motion was one of two companies showing off a gravel tandem at 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

The post NAHBS 2019: Co-Motion’s Made-in-Oregon Steelhead Tandem and Klatch Gravel Bikes appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Gravel Race: Double Old Western Showdown at North Carolina’s Love Valley Roubaix

$
0
0

No cars allowed in Love Valley. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

If one day of gravel is a great time, two days must be near perfection, right?

That is the thought behind North Carolina’s Love Valley Roubaix held on Saturday and Sunday last weekend. In its seventh year, the 2019 Love Valley race took a century and sliced it up into two halves on two different days.

“The original thought was to expand the event from 48 miles into a 100-miler. We created a figure 8 loop that included the original course which is now split into the two days,” race director Wes Davidson of Statesville’s First Flight Bicycles said.”

He continued, “The joke last year was to double the chances of getting good weather in just one of the days since we have had quite a few years of cold and wet riding and two days just made sense.”

One of the best parts of gravel cycling is it allows folks to see beautiful places and hidden gems they otherwise would not get to experience by bike. The Love Valley Roubaix is no different.

Both days of racing start and finish in the throwback historic western town of Love Valley, located at the foot of the Brushy Mountains in Northwest North Carolina. No cars allowed, of course.

No cars allowed in Love Valley. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

No cars allowed in Love Valley. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

The race website describes the town: “Love Valley is an authentic western town. It has a dirt road downtown with hitching rails for horses and a dirt road downtown that includes a general store, hardware store, blacksmith shop, saloon and few other businesses.”

“We’re grateful for the town’s continued support where the venue itself is a fun place to throw a party,” Davidson said. “There is ample camping available in the area so overall cost to participate in the full weekend’s events is easy on the wallet. Beyond what is on the website, well, what happens in the little western-themed town of Love Valley…”

Prizes are, of course, theme appropriate.

“We play on the western theme and create our own awards,” Davidson said. “This year featured awards made from our new fiber laser to etch metal plates we created. Yep, it’s a frickin’ laser.”

Prizes kept the western theme and were etched with frickin' lasers. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

Prizes kept the western theme and were etched with frickin’ lasers. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

The race started in 2013, with gravel rides turning into a gravel race.

“I have been riding the gravel roads in Love Valley since 2008 and started taking friends and customers up to ride with me. My friend Cameron Fraser loved it and decided that there should be a race so he started the Love Valley Roubaix,” Davidson said.

The two routes each checked it at around 50 miles. The Saturday route had 3,500 feet of climbing over more rolling hills, and Sunday’s packed 5,000-plus feet of climbing in, mostly via two climbs up and over the nearby mountains.

Perhaps the biggest surprise of this year’s races was the weather. After a cold, wet year in 2018, this year’s conditions were just the worst.

“The weather was terrible this year with a lot of sunshine and temps starting in the 40s and ending in the high 60s,” Davidson said. “Historically it is cold, wet, and like last year, plenty of sleet and snow.”

Instagram Photo

The Races

With two days of racing and an omnium, there are plenty of results to go through. There were age group and singlespeed categories for both the women and men, but we will report the overall finishers here.

Carla Williams took the Day 1 Women’s win, with Allison Arensman finishing second and Sarah Griffith third.

Cynthia Frazier won Day 2, and Emily Werner and Kelly Paduch took second and third.

Arensman won the omnium for her two-day consistency. Sandy Marshall finished second and Savannah Sill third.

Allison Arensman won the Women's two-day omnium. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

Allison Arensman won the Women’s two-day omnium. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

For the Men, the Day 1 overall went to Alan Starnes. Benjamin Renkema took second and Patrick Raines third.

Day 2 went to Michael Bissette, with Kerry Werner finishing second and Renkema third.

The omnium title went to Werner, and Renkema and Raines rounded out the two-day podium.

Kerry Werner won the Men's two-day omnium. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

Kerry Werner won the Men’s two-day omnium. 2019 Love Valley Roubaix Gravel Race, North Carolina. © Love Valley Roubaix

Full results for both days and the omnium are below.

The Love Valley Roubaix will return next year from March 20 through the 22nd. Due to popular demand, there may be a Friday race added to the omnium. Also, inspired by Sunday’s winner, a shot of Fireball may also be required pre-race nutrition for all non-Junior podium hopefuls.

For more gravel race goodness, see our growing archive of 2019 gravel race coverage.

Women's Day 1 Results: 2019 Love Valley Roubaix

OverallLastFirstCategoryCategory PlaceTime
1WilliamsCarlaFemale 40-12:34:17
2ArensmanAllisonFemale 40-22:43:39
3GriffithSarahFemale 40+13:02:15
4SillSavannahFemale 40-33:14:44
5MarshallSandyFemale 40+23:16:13
6ThreatteKeishaFemale 40-43:20:00
7GrantRachaelFemale 40+33:26:56
8SharpAddeFemale 40-53:46:33
9ReynoldsDianeFemale 40+43:54:48
10McGibbonAnnFemale 40+53:58:50
11CantrellCayceFemale 40+65:13:58
FrazierCynthiaFemale 40-DNF
WernerEmilyFemale 40-DNF
MoloneySarahFemale 40-DNF
HaynesKristenFemale 40-DNF
LedesmaBeccaFemale 40-DNF
SumnerAnnFemale 40+DNF

Women's Day 2 Results: 2019 Love Valley Roubaix

OverallLastFirstCategoryCategory PlaceTime
1FrazierCynthiaFemale 40-13:03:11
2WernerEmilyFemale 40-23:09:11
3PaduchKellyFemale 40-33:09:41
4ArensmanAllisonFemale 40-43:09:56
5HaynesKristenFemale 40-53:38:22
6MarshallSandyFemale 40+13:42:39
7SillSavannahFemale 40-63:55:08
8BlakelyChristyFemale 40+23:59:35
9ReynoldsDianeFemale 40+34:05:55
MoloneySarahFemale 40-DNF
ThreatteKeishaFemale 40-DNF

Women's Omnium Results: 2019 Love Valley Roubaix

PlaceLastFirstTime
1ArensmanAllison5:53:36
2MarshallSandy6:58:52
3SillSavannah7:09:52
4ThreatteKeisha7:50:00
5ReynoldsDiane8:00:43

Men's Day 1 Results: 2019 Love Valley Roubaix

OverallLastFirstCategoryCategory PlaceTime
1StarnesAlanMale 30-3912:23:43
2RenkemaBenjaminMale 30-3922:23:44
3RainesPatrickMale 50+12:23:48
4LabelleTylerMale 30-3932:23:58
5Van KempenJulesJuniors All12:24:00
6WernerKerryMale 18-2912:24:03
7MathersMichaelMale 40-4912:24:07
8PotterMichaelMale 18-2922:24:13
9BakerAndrewMale 30-3942:24:13
10CowieTristanMale 30-3952:24:13
11ChampionMattMale 30-3962:24:18
12MichaelsScottMale 30-3972:24:18
13FenderTravisMale 30-3982:24:40
14HuegelCharkieMale 30-3992:25:27
15PhillipsCodyMale 18-2932:25:42
16ClementsMatthewMale 18-2942:27:23
17KnettelBrandonMale 30-39102:33:22
18WartskiMarkMale 50+22:34:13
19ReynoldsThomasMale 30-39112:34:23
20JohnsonDanMale 40-4922:35:46
21WallacePeterMale 18-2952:35:49
22SteinerDavidMale 40-4932:39:56
23MillerRandyMale 50+32:40:34
24GroatShaunMale 40-4942:42:41
25StutzmanFredMale 40-4952:43:36
26ProvatoChrisMale 40-4962:43:40
27OlsonMarkMale 40-4972:43:41
28StaufferBruceMale 50+42:45:55
29StantonRodMale 40-4982:46:15
30GuellaChrisMale 50+52:46:16
31AllenJohnMale 60+12:46:22
32ReadyChrisMale 50+62:46:47
33HooperJasonMale 30-39122:46:52
34RuscoeMarkMale 60+22:46:54
35JohnstonSpencerMale 18-2962:48:57
36RyanAlexMale 30-39132:48:57
37MartinJamesMale 60+32:49:32
38threattejoshuaMale 30-39142:49:36
39HalseyJasonMale 40-4992:51:19
40McfeeleyPatrickMale 50+72:52:06
41CowellAlexanderMale 50+82:52:09
42PriceJamesMale 50+92:52:17
43RudisillShawnMale 40-49102:52:20
44FogartieDougMale 30-39152:53:19
45MeadJamesMale 50+102:54:42
46FabishBreckMale 50+112:55:00
47WilliamsJamesMale 50+122:55:52
48BrownJeffSingle Speed12:57:17
49DucharmeChipMale 50+132:58:16
50RogersGregMale 50+142:58:36
51ReitzelNeilMale 50+152:58:44
52ProppeJohnMale 30-39162:58:56
53FayBobMale 50+162:59:11
54BakerPorterMale 18-2972:59:33
55BroomJohnMale 40-49113:00:06
56NunnaleyJeffMale 40-49123:01:06
57PikeDennisMale 40-49133:04:33
58GillisChuckMale 60+43:05:37
59WhitewayStuartMale 50+173:05:46
60HurtCraigMale 50+183:05:51
61BrilesMichaelMale 18-2983:07:45
62GutierrezGarciaRaulMale 40-49143:07:45
63CoxDanielSingle Speed23:07:56
64KillianRallyMale 30-39173:09:04
65AlionDanMale 50+193:10:30
66LerchBrandonMale 40-49153:10:36
67GoldbergNeilMale 50+203:11:48
68SmileyJasonMale 40-49163:13:48
69JohnsonBradleyMale 30-39183:14:45
70wyattjayMale 30-39193:16:09
71DeatonMarkMale 40-49173:16:12
72ThompsonCraigMale 40-49183:16:14
73SlusserRichardMale 50+213:16:26
74LemanAdamMale 30-39203:19:12
75LambertJohnMale 30-39213:23:16
76HendersonMarshallMale 60+53:24:53
77ClarkeDavidMale 50+223:25:58
78RimronPatrickMale 50+233:25:59
79MobleyRobertMale 50+243:26:59
80ReinerJeffMale 40-49193:30:08
81BatesonDerekMale 60+63:31:56
82CraneAustinMale 30-39223:31:57
83ButtarZahidMale 50+253:32:07
84StaceyJarredMale 18-2993:33:20
85RheaultRobertMale 50+263:34:21
86RobinsonTylerMale 40-49203:37:13
87MedlinJamesMale 50+273:37:45
88VansusterenPeterMale 18-29103:46:33
89PegramSMale 50+283:48:47
90SchumanErikMale 40-49213:48:58
91MontoyaKelleySingle Speed33:49:59
92IsraelSantiagoMale 18-29113:50:00
93HamiltonJordanMale 30-39234:10:11
94PorvaznikMichaelMale 30-39244:18:18
95BrooksStanMale 60+74:47:40
96StegallGaryMale 60+84:47:41
97CanadyTimothyMale 50+295:13:57
AmalongJohn PaulJuniors AllDNF
GonzalezAndresMale 18-29DNF
CutlerNicholasMale 30-39DNF
TuckerDustinMale 30-39DNF
PipicMirzaMale 30-39DNF
SumnerWilliamMale 40-49DNF
SchmidtTodMale 40-49DNF
SmithRonMale 40-49DNF
NallsJeffMale 50+DNF
MerrimanJimMale 50+DNF
SiemensJimMale 50+DNF
TroppoliDanMale 50+DNF
LeeEricMale 50+DNF
FedorkaChuckMale 50+DNF
LechleidnerKeithMale 50+DNF
DunsmoreMarkMale 60+DNF
FullerDavidMale 60+DNF

Men's Day 2 Results: 2019 Love Valley Roubaix

OverallLastFirstCategoryCategory PlaceTime
1BissetteMichaelMale 18-2912:26:23
2WernerKerryMale 18-2922:27:48
3RenkemaBenjaminMale 30-3912:32:03
4ClancyDevinMale 30-3922:32:06
5RainesPatrickMale 50+12:34:24
6PorterLeviMale 30-3932:35:10
7BakerAndrewMale 30-3942:36:15
8PearlJamesMale 30-3952:38:44
9RaynesJustinMale 30-3962:38:55
10MichaelsScottMale 30-3972:39:05
11LabelleTylerMale 30-3982:40:32
12PennypackerJohnMale 40-4912:41:34
13RyanAlexMale 30-3992:41:53
14WisthoffMatthewMale 30-39102:42:34
15PotterMichaelMale 18-2932:44:52
16HerringSeanMale 18-2942:46:11
17Van KempenJulesJuniors All12:46:15
18YewerBradMale 40-4922:46:17
19SeymoureJayMale 30-39112:48:30
20MunozJuanMale 40-4932:49:46
21MossCameronMale 18-2952:51:07
22LiborioJustinMale 40-4942:51:18
23PfeifferWillMale 18-2962:51:25
24MarshClintonMale 40-4952:51:38
25MeadJamesMale 50+22:54:18
26DavisWheelerMale 18-2972:54:41
27ShanelyAndyMale 50+32:56:59
28LaxtonJasonMale 40-4962:58:35
29ReynoldsThomasMale 30-39123:00:18
30RimronPatrickMale 50+43:00:25
31WeigelFredMale 40-4973:02:58
32JordanMarkMale 50+53:03:22
33RobinsonScottMale 40-4983:04:27
34DavisToddMale 50+63:04:57
35StaufferBruceMale 50+73:06:33
36PorterEdwardMale 30-39133:07:56
37KouryJohnMale 40-4993:10:50
38CanonMacMale 60+13:10:53
39FullerDarrenMale 50+83:10:54
40KirkmanRichardMale 40-49103:11:00
41SheehanGregMale 50+93:12:39
42BoydShaunMale 50+103:13:24
43ProvatoChrisMale 40-49113:14:47
44SchreierAlecJuniors All23:20:03
45SchreierGarettMale 40-49123:20:04
46threattejoshuaMale 30-39143:22:50
47OlsonMarkMale 40-49133:25:07
48McCauleyRoyMale 40-49143:25:30
49WilliamsJamesMale 50+113:26:50
50HooperJasonMale 30-39153:27:15
51NunnaleyJeffMale 40-49153:27:42
52MartinGaryMale 50+123:27:57
53GibbsDoyleMale 50+133:29:39
54ColeRobertMale 50+143:31:28
55IsenbergKeithMale 40-49163:32:10
56MossAustinMale 18-2983:32:13
57GibbonsKevinMale 30-39163:33:45
58ScruggsKevinMale 50+153:35:03
59BooneTurnerMale 40-49173:37:24
60WallacePeterMale 18-2993:38:22
61LerchBrandonMale 40-49183:38:35
62BrownShawMale 40-49193:39:06
63BrownBruceMale 60+23:39:12
64PfeifferWilliamMale 60+33:40:24
65DeatonMarkMale 40-49203:42:41
66BoyerJeffMale 60+43:46:01
67FisherBrettMale 40-49213:46:52
68BeriniRobertMale 40-49223:49:19
69VandettaDavidMale 50+163:52:38
70DavantJoeMale 50+173:55:17
71CrossJosephMale 40-49233:55:24
72BrooksBenjaminMale 18-29103:57:04
73ButtarZahidMale 50+184:05:20
74RosalesAlbertMale 30-39174:08:58
75HendersonMarshallMale 60+54:13:25
CrockettDarrellMale 40-49DNF
FosterLelandMale 18-29DNF
SandyRyanMale 18-29DNF
JohnstonSpencerMale 18-29DNF
AmalongJohn PaulJuniors AllDNF
StoutAndrewMale 30-39DNF
TerryZachMale 30-39DNF
OspinaJuanMale 30-39DNF
BaresCurtisMale 30-39DNF
CutlerNicholasMale 30-39DNF
GladoraChrisMale 30-39DNF
TuckerDustinMale 30-39DNF
ReinerJeffMale 40-49DNF
GlasDietrichMale 40-49DNF
CantBartMale 40-49DNF
NallsJeffMale 50+DNF
JesterDavidMale 50+DNF
CiavattaDominicMale 50+DNF
WheelerDaveMale 50+DNF
ReavisLeeMale 50+DNF
EllingtonRoryMale 50+DNF
OdellArtMale 50+DNF
BerryMichaelMale 60+DNF
LuddekeCharlesMale 60+DNF

Men's Omnium Results: 2019 Love Valley Roubaix

PlaceLastFirstTime
1WernerKerry4:51:51
2RenkemaBenjamin4:55:47
3RainesPatrick4:58:11
4BakerAndrew5:00:28
5MichaelsScott5:03:23
6LabelleTyler5:04:30
7PotterMichael5:09:05
8Van KempenJules5:10:15
9RyanAlex5:30:50
10ReynoldsThomas5:34:41
11MeadJames5:49:00
12StaufferBruce5:52:28
13ProvatoChris5:58:27
14OlsonMark6:08:49
15threattejoshua6:12:26
16HooperJason6:14:07
17WallacePeter6:14:12
18RimronPatrick6:26:24
19NunnaleyJeff6:28:48
20DeatonMark6:58:53
21ButtarZahid7:37:27
22HendersonMarshall7:38:18

The post Gravel Race: Double Old Western Showdown at North Carolina’s Love Valley Roubaix appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

NAHBS 2019: T-Lab All-Terrain X3 Titanium Gravel / Adventure Bike

$
0
0

T-Lab is a new company formed in 2016 by the team behind Guru, the defunct producer of high-end custom bikes. Unlike its predecessor, T-Labs concentrates on one material, titanium.

At NAHBS 2019 the All-Terrain X3 gravel / adventure bike caught our eye.

[caption id="attachment_133128" align="aligncenter" width="1140"]T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The X3 has some unique features to set it apart from the multitude of other titanium bikes we saw at NAHBS.

T-Labs cold-forms Grade 9 titanium (3Al/2.5V) titanium alloy in a mold to yield the final tube shape. Those shapes include radically flattened tubes at certain weld junctions and in certain locations along the tubes.

[caption id="attachment_133119" align="aligncenter" width="1140"]T-Lab cold-forms its titanium tubing. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab cold-forms its titanium tubing. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

Co-Owner John Anagostopolous told us that T-Lab’s analysis showed that the shapes chosen in the locations chosen will offer stiffer tubes for more efficient rider energy transfer without a weight penalty. Ride quality will actually be enhanced is the claim.

[caption id="attachment_133118" align="aligncenter" width="1140"]T-Lab flattens some of the tubes for a claimed better ride. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab flattens some of the tubes for a claimed better ride. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The three-piece welded head tube saves the need to machine a billet of titanium, the typical method. Machining a head tube is time-consuming has a lot of material waste. The three-piece design enhances flexibility in frame fabrication.

[caption id="attachment_133122" align="aligncenter" width="1217"]T-Lab Bikes is based in Montreal, where it builds its titanium bikes. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab Bikes is based in Montreal, where it builds its titanium bikes. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

T-Lab also has a unique rear wheel attachment. These used to be called dropouts, as the wheel would drop out when the quick release was opened. The new standard for drop bar bikes is 12x142mm thru-axle.

T-Labs developed a system where the machined axle mounts include the derailleur mount on the drive side and the disc caliper mount on the non-drive side. Those pieces are bolted to the rear triangle. This allows interchangeability and more flexibility in frame production.

[caption id="attachment_133123" align="aligncenter" width="1094"]The X3 has unique machined axle mounts. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The X3 has unique machined axle mounts. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

A T47 threaded bottom bracket is chosen to allow a wider chainstay stance for better tire and crank arm clearance. The X3 can fit 700c x 48mm tires or 650b x 52mm.

[caption id="attachment_133124" align="aligncenter" width="1258"]The X3 has lots of clearance to aid in adventure. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The X3 has lots of clearance to aid in adventure. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The X3 frameset with a T-Lab carbon fork starts as $4,200 USD. The claimed frame weight is 1,200 grams.

The X3 build on display with the single ring Rotor 3D crankset weighed a claimed 17 pounds.

For a closer look at the T-Lab All-Terrain X3, see the photo gallery below.

More info: t-lab-bikes.com

Stay tuned for more handbuilt bikes from 2019 NAHBS show in Sacramento.

Photo Gallery: T-Lab All-Terrain X3 Titanium Bike

T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

The post NAHBS 2019: T-Lab All-Terrain X3 Titanium Gravel / Adventure Bike appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

2019 Gravel Worlds Adds L’Eroica Category for Vintage Steel Enthusiasts

$
0
0

Andy Hamsten, riding the bike that he won the Giro on. When you're such a legend, you can skip the toe clips rule. L'Eroica 2016. © C. Lee / Cyclocross Magazine

Covering a lot of gravel events across the country, one thing that is pretty clear is there are a lot of races doing their best to keep gravel weird.

The annual Gravel Worlds race p/b Lauf Forks held on the gravel roads outside Lincoln, Nebraska has always done its best to keep things interesting.

Starting with the somewhat tongue-in-cheek name and continuing to the cutlasses given out to the women and men’s open winners last year by the host Pirate Cycling League.

Last year's winners got cutlasses. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

Last year’s winners got cutlasses. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

This year, Gravel Worlds evolves by going back to the future.

The August 17 race will include an L’Eroica category designed to appeal to enthusiasts of vintage bicycles and cycling equipment—and the occasional podcast host.

The L’Eroica category will allow participants to complete the full 150-mile Gravel Worlds course on pre-1988 steel frames with vintage components.

According to Gravel Worlds Co-Director, Corey Godfrey, a growing number of gravel cyclists are taking up the challenge of riding and racing in gravel events on bicycles designed before gravel riding was a recognized cycling discipline.

“While the benefits of modern technology are easy to justify for many competitors, some cyclists still prefer steel frames, downtube shifters, and toe clips and straps. And despite the fact that most of these vintage bikes were designed to ride paved roads, they often deliver a smooth, fast ride on gravel roads when properly equipped.”

Riders will have the chance to tackle the Gravel Worlds course on vintage steel bikes. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

Riders will have the chance to tackle the Gravel Worlds course on vintage steel bikes. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

On the line will be a chance to ride like heroes of old and a custom wool jerseys matching those given out to open winners. Gravel Worlds L’Eroica competitors’ bikes must be approved by race officials at the pre-race check-in on August 16, and race co-director Godfrey there may be a vintage bike show at the Cycle Works bike shop that hosts the pre-race expo and check-in.

See below for L’Eroica category rules.

Godfrey said competitors already registered for another category at Gravel Worlds 2019 can switch to the L’Eroica category without additional fees, and registration remains open for all categories of the August 17 event.

Visit bikereg.com to register for the L’Eroica category and all race categories for the August 17 race.

Rules for the Gravel Worlds L’Eroica category include:

  • Steel frame produced prior to 1988.
  • Down tube or bar-con shifters.
  • Non-aero brake levers, with exposed brake housing.
  • Traditional pedals with toe clips and straps.
  • Minimum 32-spoke wheels with box-section, non-aero rims.
  • Leather saddles and wool jerseys preferred.

Featured image: Cliff Lee

The post 2019 Gravel Worlds Adds L’Eroica Category for Vintage Steel Enthusiasts appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Gravel Race: Great Gator Gravel Grinder Puts Southern Florida on the Gravel Map

$
0
0

The 4G race covers a variety of terrain. 2019 Great Gator Gravel Grinder. © Ross Lukoff

The great marine state of … Ohio? … has its sharks and perhaps more aptly, southern Florida has its gators.

Last weekend, the Great Gator Gravel Grinder (4G, for short) took place on the gravel roads between Homestead and the Everglades in southern Florida. Organizers dub it “the southernmost un-southern gravel grinder,” since the Miami area is not necessarily like much of the rest of the South.

This year’s event marked the sixth running of the 4G race. Like many other gravel events, the race started as a formal way of riding roads that were already well-traveled.

“I had already been riding all this stuff out there for a long time,” race director Gary Mendenhall said. “I had this idea, I should do a gravel ride down here. I mean, we’ve got gravel. I started talking about it for about two years, I kind of mulled over the idea. I had the name of the event all ready and worked out, and then finally a few friends kept pushing me, saying, just shut up and do it. So I just shut up and do it.”

This year marked the sixth 4G race. 2019 Great Gator Gravel Grinder. © Ross Lukoff

This year marked the sixth 4G race. 2019 Great Gator Gravel Grinder. © Ross Lukoff

Lots of Gravel

Southern Florida is not necessarily known as a gravel hotbed, but according to Mendenhall, there is a lot of gravel to be ridden in the area.

This year’s race offered distances of 62 and 32 miles, and organizers also put together a guided 10-mile intro to gravel ride for the gravel curious. For each of the routes, there were plenty of roads and paths to choose from.

“It’s a mixture of different roadways out there,” he said. We’ve got canal systems in Florida, and along those canals are access roads. They’re all gravel. Years ago, water management also had access roads that are either broken up pavement or dirt roads out in the middle of the Everglades. I take people onto farm fields and some of the rural dirt roads. It’s a wide variety of terrain.”

“The way I set the course up is you’re never on one section of terrain for two or three miles before I dump you into something else.”

The 4G race covers a variety of terrain. 2019 Great Gator Gravel Grinder. © Ross Lukoff

The 4G race covers a variety of terrain. 2019 Great Gator Gravel Grinder. © Ross Lukoff

Iceland’s Lauf Forks has continued to build its presence in the U.S. gravel scene, and it helped sponsor the 4G event. Lauf employee Olafur Thorarensen joined Mendenhall for a pre-race course inspection and helped put the southern Florida setting in perspective.

“We went driving through some farm fields and a couple other places, and he had done a couple of gravel rides in the States already, and he was like, ‘I’ve seen more gravel on this ride than all the other rides I’ve done here,'” Mendenhall said.

On the race website, 4G organizers recommend tires that are a minimum of 40mm wide. I’ve gotten away with running 33mm tires for a gravel race before, so 40mm, that must mean things are super chunky, right? Well, kind of.

“Just for safety’s sake, I like to say to have 700 x 40mm,” Mendenhall said. “That’s what I run all the time. As long as I can make it through anything that’s out there, I put it in the race. If it’s something I won’t ride, I won’t put it in.”

An Inclusive Event

This year’s 4G gravel event offered more than just the long distances for the weekend’s participants.

“I like my ride to be all-inclusive,” Mendenhall said. “I like to let the people who want to race, race, but I also want people to come out and ride it and challenge themselves. You also want to get people out there who are beginners. We like to have the short distance so people don’t feel left out.”

The 4G race was based out of Homestead’s Miami Brewing Company. Well, it is sort of in Homestead. The brewery is located on the outskirts of town with gravel roads leading right to the front door.

A central part of Sunday’s festivities was the 10-ish mile beginner’s ride that organizers first offered in 2018. The idea was inspired by some of the other popular events on the gravel calendar.

“A lot of events can be for a certain type of person, but gravel, all the other events have shorter distances. Look at Land Run and what they do at DK, they’re all-inclusive for almost every level of cyclist,” Mendenhall said.

“That’s what I tried to do here. Include everybody in it. We probably had about 25 riders who did the beginner 10-mile ride, which was a really good response.”

The race offers something for riders of all ages and abilities. 2019 Great Gator Gravel Grinder. © Ross Lukoff

The race offers something for riders of all ages and abilities. 2019 Great Gator Gravel Grinder. © Ross Lukoff

Another unique offering was a Saturday night night ride into the Everglades. About a dozen riders showed up for the quiet, dark 25-mile trip into the swamp.

“Doing night rides out in the Everglades is a blast,” Mendenhall said. “We’ve found pythons on some of our night rides. We go out there and see python hunters out at night.”

Finally, each year, the race features a touching emotional note in honor of a member of the region’s gravel community who was taken too soon.

One of the folks who pushed Mendenhall to host the race was Meagan Wentworth. A few days before the first-ever 4G race, Wentworth passed away after a several-year battle with a rare form of cancer.

Just a few days before Wentworth passed, Mendenhall went to her house and offered to take donations at the race to help her with her medical bills. Wentworth declined, but offered up Radio Lollipop as a non-profit she frequently volunteered as a worthy way of honoring her memory.

Mendenhall described the organization, “Radio Lollipop is a non-profit that has radio stations in hospitals around the world. One of them is here in Miami and Nicklaus Children’s Hospital. Basically what they do is entertain the kids while they’re in the hospital. They play music, they have games, kids can go on the radio and participate and play games.”

Each year and each year that the 4G event will be held, organizers take donations in Wentworth’s name for the organization.

Gators!

If you are like me, you likely came here for the gators. I mean, the Great Gator Gravel Grinder better have plenty of gators, right?

Sort of.

Although gators festoon the name and race promo materials, the prizes are more in keeping with the southernmost gravel grinder thing.

“Some of the places you’re riding through are very rural and very out in the middle of nowhere,” Mendenhall said. “We’ll ride out of and find piles of garbage people dumped, and we’ll find stuff out there and create trophies.”

A few years ago it was sandblasted mason jars filled with gravel and bullets. Last year it was flasks, this year growlers filled with Miami Brewing Company beer.

And what about gator encounters? Again, not so much.

“Unless you’re completely stupid and jump into a canal, gators are not going to bother you. Unless you mess with them, they don’t want anything to do with you. They’re usually on the edges of the canals, which are down from the road. If there is one in the canal that sees you coming, it usually just goes away,” Mendenhall said.

“Gators are fairly lazy. It takes a lot of energy for them to do anything, so if they don’t have to move, they don’t want to move.”

The Race

The 2019 Great Gator Gravel Grinder took place on Sunday. The day was near perfect, with temperatures starting in the 70s and staying there for most of the day.

Not surprisingly, the 4G routes are flat as a board, and a stiff wind did pick up that made the latter half of the race a grind.

Cindy Capwell took the Women’s win. Paulien Van Etten finished second, Rachel Losada third and Kimberly Paez and Laura Lamour rounded out the wide-angle podium.

Dan Bond won the Men’s race, with Nivio Diaz and Ruben Companioni finishing second and third. Rane Roatta and Noslen Ruiz rounded out the wide-angle podium.

Full race results for the 62-mile race are below.

Photos are available from Ross Lukoff and full results for the 62 and 32-miles races are available here. There is also a video that gives a little flavor of what the race is like.

Women's Results: 2019 Great Gator Gravel Grinder

PlaceNameTimeAverage Speed
1Cindy Capwell3:53:1715.9
2Paulien Van Etten4:09:2314.9
3Rachel Losada4:22:1014.1
4Kimberly Paez4:30:5713.7
5Laura Lamour4:42:0613.1
6Cat Innis4:46:2312.9
7Gloria Tangarife4:52:2412.7
8Annie (Agnes) Rey-Tinat5:46:2210.7
DSQMegan Duncanson
DNFMary Puchades
DNFKristian Fernandez

Men's Results: 2019 Great Gator Gravel Grinder

PlaceNameTimeAverage Speed
1Dan Bond3:06:5919.8
2Nivio Diaz3:08:1119.7
3Ruben Companioni3:08:1219.7
4Rane Roatta3:08:1219.7
5Noslen Ruiz3:17:1618.8
6Jonet Hernandez3:17:2218.8
7Hiddo Eikelboom3:19:1918.6
8Antonio Marquina3:23:4418.2
9John Sanchez3:23:4518.2
10Charlie Haimes3:23:4718.2
11Raul Romero3:31:5817.5
12Cristian Brinez3:39:2616.9
13Gene Abreu3:39:3916.9
14Jean Palau3:39:3916.9
15Camilo Medina3:39:4816.9
16Yoel Collado3:39:4916.9
17Edelman Marroquin3:44:5016.5
18Israel Vera3:44:5016.5
19Manny Anillo3:49:2516.2
20Wayne Albert3:49:2716.2
21Michel Rivero3:56:0615.7
22Jordi Hernandez3:57:0715.6
23Martin Nadeau3:57:1315.6
24Andres Viamonte4:06:5315.0
25Kevin Eggart4:09:0714.9
26Darren Vendetti4:09:0814.9
27Eamon McLaughlin4:09:5414.8
28Ian Maguire4:10:4514.8
29Jorge Llaneras4:10:4514.8
30Kevin Bodniza4:11:1014.8
31Alex Saputo4:13:2414.6
32Mark Lim4:13:4314.6
33Jared Spades4:13:5314.6
34Pablo Cardona4:15:3014.5
35Luis Gude4:15:4014.5
36Bert Lamour4:16:0714.5
37Kadel Piedraae4:21:0114.2
38Ivan Alicot4:21:2314.2
39Agustin Hondares4:21:2414.2
40Jacob Bredeson4:21:4414.2
41Robert Rocha4:27:4713.8
42James Clossick4:28:5513.8
43Fred Locascio4:28:5813.8
44Stephen Hunter4:30:4413.7
45Robert Weiser4:30:5613.7
46Gian Gil4:30:5913.7
47Adrian Cabrera4:32:1113.6
48Herberth Olivares4:34:3413.5
49Juan Millan4:34:5913.5
50Leonardo Perez4:37:3613.4
51Glado Gustavo4:37:4313.3
52Alejandro Bienes4:38:4513.3
53Eddy Goyanes4:38:4613.3
54Silvio Tito4:40:2413.2
55Jonathan Borges4:40:2513.2
56Jason Timmons4:42:0013.1
57Joe Ranalli4:45:3013.0
58Gene Hansen4:49:0012.8
59Inigo Rodriguez4:54:0712.6
60Rob Williams4:58:4212.4
61James Brower4:58:4312.4
62Neil Coleman4:58:4312.4
63David Bauer4:58:4412.4
64Alvaro Gonzalez4:58:5712.4
65Brian Paolucci4:59:1312.4
66Kenny Fletcher5:01:4512.3
67Steven McKaig5:05:3812.1
68Miguel Perea5:27:1411.3
69Martin Cordoba5:36:1611.0
70Jaime Moncloa5:36:4711.0
71William Griggs5:44:2510.8
72Ryan Stachurski5:44:3110.7
73Chuck Legow5:46:2310.7
74Frank Crowley5:55:4110.4
DNFAllan Mchenry
DNFRandall Haws
DNFChris Donley
DNFDaniel Stacey
DNFArnaldo Cabreja
DNFYusniel Yumar
DNFAnthony Cavallaro
DNFDernis Suarez
DNFJuan Arbelaez
DNFPhillip Garcia
DNFJoel Rotolante
DNFJavier Cosme
DNFTheron Miller
DNFFranklin Meyer
DNFAbraham Rodriquez
DNFBolko De Pawloski
DNFVictor De Pawloski
DNFAngel Palacios
DNFMario Renteria
DNFWill Garcia
DNFEnoch Cincotta
DNFMatthew Vollmer
DNFIvan Rosado
DNFRoger Garcia
DNFJimi Fakawi
DNFRodolfo Isaza
DNFAnthony Manfredi
DNFPablo Cardona
DNFTerrence McLaughlin
DNFChristopher DeLuise
DNFBrock E Lee
DNFJhon Sanchez

The post Gravel Race: Great Gator Gravel Grinder Puts Southern Florida on the Gravel Map appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

In Review: Pivot Vault Cyclocross / Gravel Bike with New Gravel-Oriented Build

$
0
0

Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine

Pivot Cycles is well known for its cutting-edge mountain bikes. Chris Cocalis founded Pivot Cycles in 2007, and since then, the company has led the mountain bike industry with new technologies and designs leading to the modern machines we see today.

The Vault cyclocross/gravel bike is Pivot’s only drop bar bike, making it a bike that bridges the mountain bike world to the road, whether dirt or pavement. I reviewed the original Vault in 2014. That model had both canti bosses and disc brake mounts, with quick release dropouts.

Pivot introduced the present model of the Vault in the 2017 model year. Pivot calls the Vault a cyclocross bike, but the design is equally suited to long-distance gravel and adventure riding.

The Vault has been the cyclocross bike of choice of the Pivot Cycles/Maxxis p/b Stan’s/DNA Cycling team that included Courtenay McFadden, Sofia Gomez Villafane and Jamey Driscoll this past season, and we have also seen it as Lance Haidet’s gravel rig.

The heart of the Pivot Vault has stayed mostly the same over the years, but the company now offers it with a gravel-oriented build. We take a first look at at the Vault with gravel gearing and plush tubeless gravel tires in this In Review spotlight.

[caption id="attachment_133173" align="aligncenter" width="1140"]Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

The Frame

The Vault frame is largely unchanged in shape and form since its introduction in 2014, with the notable exception of thru-axles, flat mount brakes and the absence of cantilever bosses. Also, the ability to swap dropouts between 130mm and 135mm quick release widths is long gone, now that the industry has settled on 12x142mm thru-axles.

If you know the history of the Vault, in 2014 it, along with FSA, helped introduce the bottom bracket “standard” 386 EVO, a combination of 30mm diameter spindle with a wide bottom bracket space of 86.5mm.

Pivot updated the Vault in 2015 to 12x142mm thru-axles with a 15mm thru-axle fork still with post mount for the brake caliper. A later change included a flat mount fork with the 12mm thru-axle and more tire clearance.

The 2019 update includes gearing and tire and wheel changes to make the bike more versatile for the gravel rides that now fill the cyclocross offseason.

The Pivot Vault is a carbon monocoque frame with Pivot’s “Hollow Core” molding technology and size-specific carbon layup. The goal of the design is to provide similar ride qualities from the frame across the four-bike size range.

[caption id="attachment_133171" align="aligncenter" width="1140"]The Vault has a curved top tube that is tough to miss. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine The Vault has a curved top tube that is tough to miss. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

The fork is all carbon with a tapered steerer with internal control line routing to the provision for a flat mount caliper that fits a 140mm rotor minimum. The Vault is 12mm thru-axle front and rear, with the fork able to clear a 48mm tire—that’s a 1.9″ mountain bike tire. The rear limit is a 40mm tire at the chainstays.

[caption id="attachment_133172" align="aligncenter" width="1140"]Tire clearance at the chainstays is usually the limitation. Here with Maxxis Rambler 38mm tire. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine Tire clearance at the chainstays is usually the limitation. The Vault is shown here with Maxxis Rambler 38mm tire. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

The Vault has a gracefully arcing top tube that blends into the wishbone seatstay arrangement. From the cyclocross point of view, there are two notable features: one is the external rear brake routing, and the second is the small shelf behind the bottom bracket—both a bit dated compared to cyclocross bikes we see today.

We still see bikes like the Ibis Cycles Hakka MX come with shelves behind the bottom bracket shell, but it’s a prime spot for mud collection. The Vault’s shelf is quite small, thankfully.

[caption id="attachment_133178" align="aligncenter" width="1140"]The rear has a seatstay bridge, which can be prone to holding mud. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine The rear has a seatstay bridge, which can be prone to holding mud. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

The derailleur control lines run internally, whether mechanical or electronic. There’s a bolt-on access panel on the underside of the bottom bracket to aid maintenance. External control lines make maintenance a bit easier, but for a component that remains unchanged, it’s moot.

While most may prefer the clean lines of internal routing, I do wish the fork had external brake line routing, as it would allow putting a Lauf fork on for the gravel season, then easily switch back to the rigid fork for cyclocross. That is a minor consideration and perhaps not important to the majority of riders out there.

[caption id="attachment_133175" align="aligncenter" width="600"]Front brake cables are internally routed. We wouldn't mind if they were external to allow a suspension fork to be swapped in. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine Front brake cables are internally routed. We wouldn’t mind if they were external to allow a suspension fork to be swapped in. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

Geometry is relatively standard for modern cyclocross bike: 72-degree head tube angle paired with a 73.5-degree seat angle on our size M review bike. The effective top tube is 55.7cm, which adds up to a 38.3cm reach.

The head tube is 155mm, average for a bike of this size. The stack height is 56.9cm. The bottom bracket drop is 6.5cm and with 42.5cm chainstays, the wheelbase is 101.9cm. That’s classic, modern cyclocross race bike geometry.

There are two bottle mounts in the expected places of the down tube and seat tube. Pivot skips the third bottle mount, adventure mounts or provisions for fenders, as the Vault is built with racing in mind.

The iconic blue paint scheme has masking to reveal the raw carbon as part of the graphics, creating what this tester finds is a very attractive appearance.

The Build

For 2019, the Pivot has an Ultegra R8000 mechanical drivetrain, including the shift/brake levers, front and rear derailleurs and hydraulic brake calipers.

[caption id="attachment_133168" align="aligncenter" width="1140"]The Vault comes with flat mount hydra 160mm rear rotor. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine The Vault comes with flat mount hydra 160mm rear rotor. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

Our test bike featured Pivot’s latest gravel-oriented build, with Praxis Works’ Zayante M30 hollow-forged aluminum crankset with “micro compact” 48/32t chain rings. Paired with the Shimano 105 11-32 11-speed cassette, you get a 1-1 gear ratio, yielding a grade-taming 27 gear inches.

We’ve found the Maxxis Rambler 40 EXO TR to be extremely light but undersized in previous testing. However, the pair of Ramblers marked 38 EXO TR that came tubeless mounted on the new Stan’s NoTubes Grail MK3 rims that have a 20.3mm internal width measured 39mm and appear to be close to the maximum width that the Vault can take at the rear end, limited by the chainstay spacing. The Grail wheelset has a weight of 1,675 grams.

[caption id="attachment_133176" align="aligncenter" width="1140"]The Vault comes with the new Stan's Grail MK3 alloy rims with Maxxis Rambler gravel tires mounted. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine The Vault comes with the new Stan’s Grail MK3 alloy rims with Maxxis Rambler gravel tires mounted. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

3T provides the aluminum bar, stem and seatpost, the latter a Stilo 25 Pro with a 2-bolt saddle mount. A Pivot Phoenix branded WTB Volt saddle with chro-moly rails tops the post. The 44cm 3T Ergosum bar has a compact bend with no flare.

[caption id="attachment_133169" align="aligncenter" width="1140"]Our bike came with a 3T stem and bars with new Shimano Ultegra R8000 mechanical levers. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine Our bike came with a 3T stem and bars with new Shimano Ultegra R8000 mechanical levers. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

The build yields the curb weight of 19.2 pounds. It is not built to be a weight weenie’s dream, but instead features a solid choice of reliable components.

First Impressions

The frame appears unchanged since I reviewed the bike four years ago, but with a new fork and components, it’s fresh.

The racy geometry makes the Vault fun to ride, especially in tight quarters. The frame has a balanced feel combining the nimble handling with a stiff platform for pedaling efficiency. The stiffness translates to definite road feel, and when you’re off-road you feel it.

It is more compliant than a few bikes I’ve ridden recently, but still on the stiffer side. The wide, supple tubeless Maxxis Ramblers are a great addition to the Vault. They add damping and their light suppleness adds to the lively ride.

[caption id="attachment_133170" align="aligncenter" width="1140"]Tire clearance at the fork crown with Rambler 38mm tire. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine Tire clearance at the fork crown with Rambler 38mm tire. Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine[/caption]

With the new fork you can put a really wide or aggressive front tire to offer some versatility for a long haul or rutted, rocky trail. That is something we will definitely try as we take the Pivot Vault on the long haul. Certainly the new wide gear spread with a new lower gear will add to the versatility and encourages adventure.

Pro cyclocrossers Courtenay McFadden, Sofia Gomez Villafane and Jamey Driscoll all had much cyclocross success on the Pivot Vault, but after a few weeks on this current build, the Vault certainly has shown it’s versatile for gravel adventures as well.

Stay tuned for our long-term test. For a closer look at the Pivot Vault cyclocross/gravel bike, see the specs and photo gallery below.

Pivot Vault Cyclocross/Gravel Bike Specs

MSRP: $4,600
Weight: 19.2 pounds, no pedals; 12.0 lbs without wheels or pedals
Frame: Carbon fiber, Pivot Hollow Core molded
Fork: Carbon fiber, tapered steering tube 1 ⅛-1 ¼”, 12mm thru-axle
Shifters: Shimano Ultegra 8020 hydraulic, 11-speed
Crankset: Praxis Works Zayante M30, 48/32t chain rings
Brakes: Shimano Ultegra 8000 flat mount calipers, Shimano XT RT-81 rotors 160mm front, 160mm rear
Cockpit: 3T Ergosum Pro bar (44mm) and ARX II stem (100mm)
Seatpost:  3T Stilo 25 Pro alloy, 2 bolt, 25mm setback
Saddle: WTB Volt
Wheels: Stan’s NoTubes Grail MK3, alloy
Tires: Maxxis Rambler 700c x 38mm EXO TR
Warranty: 10 years, frame and fork (original owner)
Country of origin: Taiwan
More Info: pivotcycles.com

Photo Gallery: Pivot Cycles Cyclocross/Gravel Bike

Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine

Pivot Vault Cyclocross/Gravel Bike. © C. Lee / Cyclocross Magazine

The post In Review: Pivot Vault Cyclocross / Gravel Bike with New Gravel-Oriented Build appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.


UCI Electifies Gravel Scene, Announces First-Ever Gravel eRacing World Championships

$
0
0

Zwift even has some gravel! Zwift review.

After British Cycling’s successful sanctioned eRacing National Championship last week, the UCI has taken note and announced today that it will be sanctioning the first-ever eRacing UCI World Championships.

Instagram Photo

That’s right. You’ll be able to race virtually for a real life UCI rainbow jersey. In an odd pairing of two of the fastest-growing disciplines of cycling, the UCI’s first eRacing championships, slated for summer 2020, will be a gravel event.

“We’ve been looking at these gravel grinders and their growing popularity for a while,” said the UCI’s president David Lappartient. “But the problem is, gravel is not an even playing field. Not every country has miles and miles of gravel roads and undeveloped land. Some countries just have dirt roads, cobbles or old farm tracks, while other countries have year ‘round mud. Plus some gravel events sell out in hours, and are getting quite expensive. We need to be fair, and eSports and eRacing are the perfect way to bring all that’s great about gravel racing to cyclists around the world, whether they have access to gravel or not.”

Not every country enjoys such gravel terrain, and the UCI is addressing that with eRacing in its first-ever World Championships. © Cyclocross Magazine

Not every country enjoys such gravel terrain, and the UCI is addressing that with eRacing in its first-ever World Championships. © Cyclocross Magazine

The British eRacing National Championships was a beautiful example of how we can bring racing to the masses without the complications of geography, Mother Nature, or the dangers of inexperienced racers or aerobars,” Lappartient explained.

“We’ll bring all the great gravel scenery to racers, without the adventure of getting lost, losing traction, getting a flat tire or running out of fuel. We’ve heard from so many cyclists that this sounds too good to be true, but I promise, it’ll be deserving of a rainbow jersey.”

“We’ll bring all the great gravel scenery to racers, without the adventure of getting lost, losing traction, getting a flat tire or running out of fuel.” -Lappartient, UCI President

The UCI is also keen to use eRacing as a way to level the gravel playing field in terms of equipment. Admitting its 2010 move to reduce maximum cyclocross tire widths from 35mm to 33mm was a failure in reducing the financial burden on racers to be competitive, since the most budget-constrained racers on clincher or tubeless tires push out past that mark on the today’s wide rims, the UCI has eliminated the tire and wheel component entirely with its eRacing approach.

“We know the top European juniors already have dozens of carbon tubular wheelsets,” said the UCI Technical Director Xavier Dafflon. “The last thing we want to do is force them to buy another wheelset just to go tubeless and be competitive in gravel.”

While tubeless wheels are the norm in gravel racing, with gravel eRacing, the UCI is making sure top cyclocross racers on tubulars won't have to buy another wheelset. © Cyclocross Magazine

While tubeless wheels are the norm in gravel racing, with gravel eRacing, the UCI is making sure top cyclocross racers dedicated to tubulars won’t have to buy another wheelset. © Cyclocross Magazine

The first-ever UCI Worlds eRace gravel format, like the British championships, will be a three-stage competition, but this one will at least pay homage to some off-road history, albeit of a flat bar nature. There will be a hill climb, an endurance point-to-point race and a downhill, all with the simulated gravel resistance and scenery.

“It would be better if we could also add in an observed trials, like the early mountain bike races required, but we haven’t yet figured out a way to test such bike skills virtually,” said Lappartient. “It’s coming though, you can be certain of that.”

As for the racing platform for the championships, Dafflon remains noncommittal. “Even though the British Cycling championships were held on Zwift, we want to be true to the UCI’s country of residence, and be the Switzerland of eRacing. We’ll put out the championships to bid, so companies like BKool, Kinomap and Rouvy can have a chance of hosting the event, and the winning proposal will help decide whether it will stay with the gravel format in the future, or move towards other disciplines. It’ll be like the Olympic bid process—open, transparent, and totally objective.”

Zwift has gravel, but isn't guaranteed to be the platform of choice for the 2020 UCI gravel eRace world championships.

Zwift has gravel, but isn’t guaranteed to be the platform of choice for the 2020 UCI gravel eRace world championships.

When asked by Cyclocross Magazine about the potential of having a real, UCI-sanctioned outdoor gravel world championships, or partnering up with the current “Gravel Worlds,” Lappartient hinted at a different, more powerful approach that might just shock current gravel racers.

“Our E-MTB Mountain Bike World Championships coming on August 28, 2019 to Mont-Saint-Anne is already generating an impressive amount of interest,” said Lappartient. “Gravel events are so long, way longer than a mountain bike race, and longer than some Tour de France stages. It’s really inhuman, especially if you’re in Kansas for ten or more hours. We think the safest, healthiest way to race such distances is with an e-bike. We’re committed to keeping cycling clean, and allowing e-bikes in gravel seems the most logical way to do that, if or when we sanction the sport. We want to get it right, after we’ve watched USA Cycling’s well-documented struggles.”

“Gravel events are so long, way longer than a mountain bike race, and longer than some Tour de France stages. It’s really inhuman, especially if you’re in Kansas for ten or more hours. We think the safest, healthiest way to race such distances is with an e-bike.” -Lappartient

With gravel e-bikes already available from Van Dessel Cycles, Raleigh, Bulls and Merlin, rainbow jersey hopefuls betting on the UCI’s hint already have a number of options. And with today’s announcement, we’re sure there will be more to come.

Gravel eRacing and gravel e-bikes. What’s next? Stay tuned for the latest on this electrifying story.

The post UCI Electifies Gravel Scene, Announces First-Ever Gravel eRacing World Championships appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

CBS Sports Obtains Exclusive Rights to Broadcast 2019 Dirty Kanza 200

$
0
0

There will be a lot more cameras than just those belonging to Trek at this year's DK200. 2018 Men's Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

CBS Sports announced today that it has obtained exclusive broadcast rights to the 2019 Dirty Kanza 200 and will be airing the June 1 race live on its broadcast network.

The rights purchase represents the latest sign of the growth of gravel cycling in the U.S., as it will be the first gravel race broadcast live on television and the footage will be some of the first video of the discipline not made on shaky GoPros.

“Ever since the demise of Lance Armstrong, U.S. cycling fans have been looking for a product to fall in love with,” CBS Sports chairman Sean McManus said. “With gravel exploding in popularity, we think the Dirty Kanza 200 is the perfect vehicle for new stars.”

“We are excited for this partnership between the Dirty Kanza and CBS Sports,” Dirty Kanza race director Jim Cummins said. “One could say I am as excited about this broadcast as I am about the new seasons of Madam Secretary and God Friended Me coming to CBS this fall.”

There will be a lot more cameras than just those belonging to Trek at this year's DK200. 2018 Men's Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

There will be a lot more cameras than just those belonging to Trek at this year’s DK200. 2018 Men’s Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

The purchase by CBS Sports came as a bit of a surprise in the industry, given that NBC Sports holds the rights to the Tour de France, UCI Cyclocross World Cups and other events.

According to McManus, the success of CBS Sports’ hour-long broadcast of the 2018 Iceman Cometh mountain bike race last year played a role in the company’s decision making.

“We learned a lot from that Iceman show,” McManus said. “Sure DK is like 20 times longer, but how different can it really be? Geoff Kabush on a drop bar bike at Iceman, Geoff Kabush on a drop bar bike at Kanza, basically the same thing.”

A Historic Broadcast

Full details about the broadcast have not been finalized yet, but a release from the network outlined its plans for the June 1 broadcast.

Whereas cycling events used to be broadcast on the NBC Sports Network cable station and are now only available via the NBC Gold subscription service, the Dirty Kanza 200 will be shown on the CBS broadcast network station.

The race will be shown live, with the show going on the air at 6:30 a.m. Eastern with the “Groad to Kansas” pre-race show—named as such to avoid copyright conflicts with Ted King’s “Groad to Kanza.”

It will then broadcast the 206-mile race in its entirety, from the start in Emporia to the Flint Hills all the way to the finish back in Emporia.

The broadcast will start from the early morning streets of Emporia and keep going well into the night until the last rider finishes. 2018 Men's Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

The broadcast will start from the early morning streets of Emporia and keep going well into the night until the last rider finishes. 2018 Men’s Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

According to the company, “in its entirety,” means “in its entirety.”

Race cameras will follow the Women and Men’s leaders for the roughly 11-12 hours they are expected to be on course, and then coverage will shift to the 700-plus participants racing the sun, then midnight and then finishing in the wee hours of Sunday morning.

“This is an unprecedented move in U.S. sports broadcasting,” McManus said. “In gravel racing, 500th-place is just as important as 1st, so we think all participants are worthy of camera time. We all remember images of Ironman athletes crawling across the finish line. We think dust-covered faces coasting into Emporia will be equally compelling.”

“Plus, ABC has the NBA Finals, baseball games already take like 12 hours and what other sports are there out there? What else are we going to show on a Saturday afternoon in June?” he added.

All riders will get their time on camera, not just the leaders. 2018 Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

All riders will get their time on camera, not just the leaders. 2018 Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

With plenty of air time to fill, CBS Sports subtly indicated it plans to take a page out of rival NBC’s focus on the human-interest stories of the athletes. CBS Sports said it will focus on pre-race favorites for the first half of the broadcast, but since gravel racing’s success is built on the stories of all riders, getting the backstories of those finishing in the early hours of the morning may be a bigger challenge.

“People eat up those personal interest stories during the Olympics. Why reinvent the wheel?” McManus said. “Admittedly, we may have to take some creative license with some of the amateurs.”

Broadcast Team of Legends

Early reports are that CBS Sports plans to pull out all the stops with its broadcast team.

Anchoring the desk will be an international duo of Englishman Phil Liggett and American Brad Sohner.

“Phil is a legend,” McManus said. “If he can do three weeks at the Tour, he can do one day in Kansas. And Sohner, we’ve heard lots of good things about him, and we saw that coverage of his Cat 5 crit on Twitter. If a man can cover a Cat 5 crit, the biggest gravel race in the U.S. should be no problem.”

Liggett and Sohner might not know it yet, but the two will be on the mic for the entire 20-plus hour broadcast. Calling the steady-moving action at the pointy end of the race and then helping bring home the amateurs accomplishing their bucket-list feat of finishing the DK200.

“Hire two broadcast teams? What do you think this is, an NFL pre-game show?” McManus said.

“We are, to be honest, looking at Red Bull as a potential sponsor,” he added.

The broadcast team will not be limited to a desk team in Emporia.

Georgia Gould will be joining the team as the Women’s on-course correspondent. Gould will be following the Women’s leaders in a moto outfitted with special DK200 gravel tires designed by Challenge Tires specifically for the rigors of the Flint Hills gravel.

“I enjoyed commentating during the Iceman Cometh last fall, so they pretty much had me at ‘gravel moto,'” Gould said. “I thought about asking Helen Wyman to help, she’s been great on those GCN cyclocross steams, but she said she would never do the Dirty Kanza 200, so she’s out.”

Jens Voigt will be bringing his experience from the 2018 Dirty Kanza 200 to the gravel roads as the Men’s correspondent. Voigt will be traveling in one of the Jeep club vehicles, which will carry a Trek Checkpoint—specially outfitted with mics and cameras and a strong wireless connection for the remote Kansas plains—that will allow Voigt to do in-race interviews.

“Jens brings knowledge of what it’s like to suffer through the Dirty Kanza. We think the in-race interviews will add another dimension to our broadcast,” McManus. “Riders often say they hear voices in the second half of the course. This year, that voice will be Jens yelling at other riders’ legs.”

Jens Voigt will bring his DK experience to the broadcast. 2018 Men's Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

Jens Voigt will bring his DK experience to the broadcast. 2018 Men’s Dirty Kanza 200. © Z. Schuster / Cyclocross Magazine

A Big Move for Gravel

The broadcast television debut of the Dirty Kanza 200 is the latest big step for the annual Kansas gravel race.

Two years ago, the race went to a lottery due to the overwhelming number of gravel riders interested in the race, and last fall, race director Jim Cummins announced the sale of the Dirty Kanza to Life Time Events.

At the beginning of the year, the EF Education First WorldTour team announced that some of its riders will be racing the Dirty Kanza 200, giving the race additional prestige for 2019.

“I’d be lying if I said EF Education first racing did not influence our decision to broadcast the race,” McManus said. “We saw how much attention Lawson Craddock got for finishing DFL at the Tour last year, so we figured if it worked then, showing all the riders at DK would be a good move as well. Think of all the Velodromes we could help fund.”

One current gravel star who will be in the spotlight this year is Ted King. After leaving the WorldTour, King kicked off a gravel career that already has two DK200 titles on its list of accomplishments. After winning last year, King is expected to be challenged by the EF Education First riders.

“The more the merrier, that’s my approach,” King said from his Vermont home. “Knowing that Phil [Liggett] is on the mic will help bring back that Tour de France feeling. Fortunately, this is just one day instead of three.”

The post CBS Sports Obtains Exclusive Rights to Broadcast 2019 Dirty Kanza 200 appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Jake Wells is Up for the Challenge of the Land Run 100 50k Run, 100-Mile Ride

$
0
0

Jake Wells won the run/ride double at the 2019 Land Run 100. photo: Corrie Wells

When conditions turned ugly on Friday and Saturday at Louisville Nationals, Jake Wells was nothing short of a star, especially when he had to get off his bike and run.

Looking back, it turns out Wells had a big advantage.

“As I was preparing for Cyclocross Nats in Louisville, I knew I was in for Land Run double and needed to be getting in some runs, but because ’cross is such a short and more explosive effort, I didn’t want to do a lot of long, slow runs just yet. A long run for me was six or seven miles, and I was doing one of those per week,” Wells said.

Knowing that he was training for the Land Run double—a 50k run on Friday and the 100-mile ride on Saturday—Wells won the Masters 40-44 and Singlespeed titles in Louisville for the second time in 2018.

Jake Wells won four cyclocross national championships in 2018. Masters Men 40-44. 2018 Cyclocross National Championships, Louisville, KY. © K. Baumgardt / Cyclocross MagazineJake Wells won four cyclocross national championships in 2018. Masters Men 40-44. 2018 Cyclocross National Championships, Louisville, KY. © K. Baumgardt / Cyclocross Magazine

Jake Wells won four cyclocross national championships in 2018. Masters Men 40-44. 2018 Cyclocross National Championships, Louisville, KY. © K. Baumgardt / Cyclocross Magazine

Wells eventually upped his running volume and headed to Stillwater earlier this month for the two-day mixed-discipline race.

Wells finished 3rd in Friday’s run behind Jason Smith and Cody Jones, but on Saturday back on the bike, he finished tops among the double competitors and 10th overall.

“I ended up coming in with one other guy and we were about four minutes off the leaders,” Wells said about Saturday’s 100-mile bike race. “Then it was just a waiting game. I needed to make up just over 23 minutes, and I was just watching the clock. Once that 23-minute mark came and went I was able to start to celebrate a little. James came in a little more than 30 minutes after me.”

Jake Wells won the run/ride double at the 2019 Land Run 100. photo: Corrie Wells

Jake Wells won the run/ride double at the 2019 Land Run 100. photo: Corrie Wells

We chatted with Wells about the experience of training for two long-distance races back-to-back, and of course, we took a look at his running gravel gear.

Interview: Jake Wells on Winning the Land Run Run/Ride Double

Cyclocross Magazine: Where did the motivation to do the Run / Bike double come from?

Jake Wells: I’ve been familiar with the Land Run 100 for the last couple of years, and it has been on my list of events that looked really cool and wanted to check out. For this season, I decided that I wanted to do some events that really challenged me and pushed my comfort level more so than just being competitive.

Last year I raced Belgian Waffle Ride, Dirty Kanza and Gravel Worlds, so I was confident in my ability to complete the Land Run, and if I could get my training correct, I felt like I could be competitive.

Adding in the unknown element of a 50k run the day before was something that caused me to retract a little. So, I leaned into it. When registration opened, I threw my name in the hat. The event filled up almost immediately but I got in the Double and was like “Okay, now what?!?”

CXM: You crushed the running at Louisville Nats, is that something that is regularly part of your training?

JW: Yes, typically. I have played with different levels of running when it comes to preparing for ’cross. Everything from no running at all to logging 12 to 15 miles per week. As I was preparing for Cyclocross Nats in Louisville, I knew I was in for Land Run double and needed to be getting in some runs, but because ’cross is such a short and more explosive effort, I didn’t want to do a lot of long, slow runs just yet.

A long run for me was six or seven miles, and I was doing one of those per week, but I would do two or three-mile runs a couple of times per week, and I would do those runs pretty fast. Like a seven-minute pace or quicker. I feel like this actually helped with my legs making the adjustment to the impact of running and it gave the connective tissue in my joints time to catch up to my leg strength.

I think the fact that I had CX Nats looming forced me to keep the volume of my runs a little light with was a blessing in the end. It obviously paid off at Nationals.

CXM: How did you mix running and biking in your training? Did you look toward triathlon training at all?

JW: I didn’t look at any tri training, but I felt that if I could get my running efficiency up and maintain a respectable pace for the run, I could make up for a bit of deficit when I was on the bike.

CXM: How did the run go?

JW: The run went really well. It was a big question mark for me because I had never run that far. My biggest training run leading up to the event was 23 miles, and I hadn’t raced anything longer than a 10k in over 15 years or so.

Cody [Jones] and Jason [Smith] were pretty much gone from the gun. I got occasional time checks, but I tried not to worry too much about them and their pace. I had a goal of 4 hours for the 50k but it was pretty windy, so I decided to settle into a group of 5 early on. Our pace was good, and I was able to sit in some and do what I could to conserve.

It looked like we were going to get a nice tailwind around Mile 14 and at that point, I was still feeling good, so I let the choke out a little. I did like five miles there in the middle at sub-seven-minute pace. I think I probably paid for that effort over the last few miles. The lesson learned is that pacing for an Ultra is even more important than when on the bike.

In the end, I finished 3rd and I ran 3 hours and 47 minutes, 3 minutes under my goal time, but I had an 18-minute deficit to Cody, last year’s winner, and was almost 23 minutes behind Jason, who was an unknown at that time.

CXM: Since we always ask about bikes, what shoes did you wear? Any special gravel mods?

JW: I’ve been training in the New Balance Summit Unknown shoes. They are a pretty minimal shoe, but a legit trail runner with a rock plate underfoot. I was happy with the shoes in my training, so no last minute changes.

The big unknown for me was nutrition and how much could my stomach handle over the four hours. I finished feeling pretty good energy level wise, but my legs were pretty locked up. Mostly my calves and hamstrings.

CXM: How was it Day 2 getting on the bike? Any regrets on Saturday morning?

JW: Similar to a stage race, I knew recovery was going to be a big factor. In my training, I was used to getting on the bike the day after my long run, so I was confident that my legs would come around on the bike, but I had never run this far.

As soon as I finished the run, I got some food and took a nap. I tried to stretch out the legs as much as I could. In the evening, I decided to take an easy spin over to the racers’ meeting, about one mile from our condo. That actually felt pretty good on the legs. But I wasn’t sure how the body would respond the next day and if I would have the responsiveness to make the lead group on the bike or not.

CXM: Looks like you had some time to make up in the ride? How did that affect your approach?

JW: My goal on the bike was to try to get toward the front and hopefully make the lead group or at least be in the first chase group. I was kind of surprised at how well the legs felt, and with every mile we ticked off, I was gaining confidence that I was going to be able to maintain contact with the front of the race.

The top 3 guys, Payson, Teddy, and Drew got away with about 35 miles to go after a bottleneck section that required a dismount and some savvy mud clearing tactics. But I was able to get in with a couple of guys and we worked together to minimize the time lost.

We pretty much stayed together until 12 miles to go and then things splintered up a little. I ended up coming in with one other guy and we were about four minutes off the leaders. Then it was just a waiting game. I needed to make up just over 23 minutes, and I was just watching the clock.

Once that 23-minute mark came and went I was able to start to celebrate a little. Jason came in a little more than 30 minutes after me.

Instagram Photo

CXM: It looks like you finished top 10 in the ride? You wish you just smashed on Saturday after that result?

JW: I was super happy with how the ride went. It’s hard to say, those guys at the front were riding super strong, so I don’t really know what would have been different if I hadn’t done the run the day before, but I was really happy with the result. Really tired, but really happy.

CXM: What advice do you have for folks looking to do the double next year?

JW: We had a great snow year here in Colorado, which meant that it wasn’t so great for getting out on the bike, but I was able to get out for some great long runs and some uphill ski tours. To me, running was the most challenging element to this event so it all worked in harmony.

So, my advice for folks would be to sign up and do it. You just might surprise yourself. We are all looking for our own personal adventure and challenge. That’s why we do these events.

Get a training plan that works with your schedule and do the best you can to prepare, but in the end, if it is something that scares you a little and you want to retract from it, don’t. Instead, lean into it and embrace the challenge.

CXM: It seems like you’ve been enjoying your “post-retirement” gravel/Masters cyclocross/ultrarunning. What about this approach has been so appealing for you?

JW: Yes, I’m definitely enjoying the way things are going right now. I think the key to it all is balance and motivation. Like I’ve said, I’m finding joy in jumping into these events that are not my typical type of events, ether running events or ultra long days on the bike. To me, it’s an avenue to inspire and motivate others.

I used to think that I was only able to do that if I was at the front of every race I entered, but now I realize that I can achieve that even in my weekly training routine or by following my nutrition program or by being consistent with recovery or mediation practice. It’s well beyond a result. For me, that takes away some pressure and allows me to follow my passion and my heart and continue to find joy in whatever I’m doing.

CXM: Awesome. Thanks. Looking forward to seeing what adventure is next.

JW: Yah, thank you.

The post Jake Wells is Up for the Challenge of the Land Run 100 50k Run, 100-Mile Ride appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Ridden and Reviewed: Kona Libre DL Carbon Gravel/Adventure Bike

$
0
0

Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine

Kona has bikes that are not exactly trend-following. We recently wrote a favorable review of the Kona Major Jake as an innovative cyclocross racing design with a slack head angle and increased trail measurement yielding a capable bike for fast technical terrain.

Hot on the redesigned Jake’s heels, introduced in 2018, is the Kona Libre DL that initially looks like a taller, longer Jake with more attachment points for accessories. First impressions, however, can sometimes be deceiving. It is not, even if some similarities exist.

We would describe the Libre DL as a gravel road and trail adventure bike. Perhaps even closer to a drop bar mountain bike.

[caption id="attachment_132651" align="aligncenter" width="1140"]Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

We have taken the Libre DL to its preferred environment, putting in miles on gravel roads and mixed-terrain for this review.

The Frame

The great thing about the Libre DL is the Kona Race Light carbon frame at its heart. A Large Libre DL frameset (54cm seat tube) with a SRAM Force 1 build with a huge 10-42t cassette tips the scale at a scant 19 pounds.

The carbon frame has similarity with the Major Jake with relatively thin walls on the huge downtube evidenced by the fact that squeezing the tube flexes the walls a bit, like a metal can. Control lines run internally in the same pattern as the Major Jake. There is a hatch beneath the press-fit BB86 to access the control lines.

[caption id="attachment_132648" align="aligncenter" width="1140"]The frame is made from Kona's Race Light carbon. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine The frame is made from Kona’s Race Light carbon. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

Although our bike has a single front chain ring, there is provision for a front derailleur.

Our review sample is a 54cm based on the seat tube length, though the effective top tube length is a roomy 58.8cm. The headtube is 196mm tall and set at 71 degrees in combination with the 72.5-degree seat tube angle, making the Libre DL’s geometry similar to old steel touring bikes from 40 years ago.

To complete that description, the chainstays are 44cm with a 7.2cm bottom bracket drop. With a rangy 638mm front center, the wheelbase is a stretched out to 106.8mm. The reach is 389mm and the stack 630mm, relatively normal for a size Large bike, though I would consider the stack high, which puts the bars up quite high.

[caption id="attachment_132644" align="aligncenter" width="600"]With a long reach, the Libre DL comes with a short stem. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine With a long reach, the Libre DL comes with a short stem. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

The Libre DL has a number of mounting points for bottles and other adventure mount accessories—so many that it’s an adventure figuring out all things you can mount. There are four screws on the outside of each fork blade and one on the inside. The latter is for fender stays, the former is for front rack(s), cargo cages or extra bottle cages.

There are four sets of bottle mounts, two sets on the downtube, one set under the down tube and one set on the seat tube. There are two screws on the top tube for a “bento box” type bag. The rear end has both rack and fender mounts.

[caption id="attachment_132643" align="aligncenter" width="1140"]The top tube has mounts for a "bento box" bag. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine The top tube has mounts for a “bento box” bag. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

The Libre DL has 12mm thru-axles and flat mount brakes with a minimum rotor size of 140mm. The included thru-axles require a T30 Torx wrench.

The Build

The Libre frameset comes in two different builds. The Libre DL we reviewed comes with 700c wheels with 45mm tires and a SRAM Force 1 drivetrain. The Libre, with the same frame, has 650b wheels with 47mm road-plus tires and a Shimano 105 group.

The SRAM Force 1 HRD group on the Libre DL has a 40-tooth front ring on the carbon arm SRAM Force crank paired with an XD 10-42t 11-speed cassette. The calipers are flat mount with 160mm SRAM Centerline rotors with polished edges.

[caption id="attachment_132646" align="aligncenter" width="1140"]The Libre DL comes with a 1x drivetrain with a SRAM Force 1 rear derailleur. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine The Libre DL comes with a 1x drivetrain with a SRAM Force 1 rear derailleur. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

Thanks to the long reach of the frame, the stem is a short 80mm, a bit like a modern mountain bike and a style that has its origins with the Gary Fisher Genesis geometry. Most remarkable amongst the accessory components is the Kona branded aluminum handlebar that is 48cm wide (measured c-c) at the brake hoods and flares to a whopping 56cm at the drops. The bars might not quite meet the definition of dirt drops, but they’re more flared than your average gravel bar.

The aluminum seatpost holds on to the WTB saddle with a two bolt clamp, the same setup as we had on the Major Jake we reviewed.

The Libre DL has the new Easton EA70 AX wheelset, a 1,600+ (claimed) gram aluminum rim set with a 24mm internal width. The wheelset is part of Easton’s adventure line and is thus designed with a wide 24mm internal width. The wheels are stout, with 28 straight-pull straight-gauge spokes, brass nipples and 3x lacing. The wheelset weight is competitive with the majority of carbon wheelsets with 24mm internal width.

The 700c x 45mm WTB Riddlers reach their full width when inflated and the combination is an easy and reliable tubeless setup.

[caption id="attachment_132654" align="aligncenter" width="1140"]The Kona Libre DL comes with 700c x 45mm tires and has clearance for a little bit more. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine The Kona Libre DL comes with 700c x 45mm tires and has clearance for a little bit more. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

My only qualm is the use of T-30 Torx thru-axles. This size is not on any multi-tool that I can easily think of and gas stations or hardware stores do not always have one. For a bike like this, there is nothing wrong with having a levered through axle or even an Allen key fixture instead of a T30 Torx. If we were to spend the summer riding the Libre DL, we’d be calling up the Robert Axle Project for some hex replacements.

The Ride

My initial impression from riding the Libre DL is it is an all-rigid 29er mountain bike, reimagined.

In 2006, my 26er Giant Anthem XC race machine had a 71-degree head angle, and 1.9-inch wide tires were not unusual. The bars were lower than the saddle, and the Gary Fisher Genesis-inspired geometry stretched out the top tube and added a shorter stem, changing the steering and handling.

The Libre combines these elements. I have no hesitation stating the Libre is fun to ride in the 700c configuration. Some gravel bikes lean towards road roots, others have a more mountain bike character. The Libre is the latter and from a cyclocross perspective, we might call this monstercross.

I’ve come to like this style as I venture further off the traveled roads. With the tall stack, I set up the handlebar tops to be level with the saddle height, a classic touring position. This put my weight a bit more on the saddle, but I found myself using the drop sections of the bars more.

I could flip the stem to be flat and remove the spacers to “slam the stem.” That would gain up to 4cm of saddle to handlebar drop, but I rather enjoyed the upright position, especially when on long descents off road.

[caption id="attachment_132652" align="aligncenter" width="1140"]With a relatively high stack, our tester's handlebar was at saddle height. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine With a relatively high stack, our tester’s handlebar was at saddle height. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

I’m not the biggest fan of super wide bars, but they seemed to match the upright position and the theme of the bike. I appreciate their inclusion since with a heavy load up front from whatever cargo situation you choose, the wide bar will be necessary for steering torque. The position is conducive to enjoying the sights on climbs and flat terrain, and bombing the descents.

In spite of the high and wide rider position, the bike is no slouch on pavement—the efficient frame transmits your crank effort to the rear wheel without hesitation. In a sprint, the bike does not hold you back; it’s super responsive to your pedal input. Leaning into a sweeping road turn does not require much effort, the bike follows the line you set. The Riddler tires have a shallow tread with small knobs and 35 psi on the road gives a smooth buzz.

[caption id="attachment_132653" align="aligncenter" width="1140"]The bars on the Libre DL are wide, with our test bike coming with flared bars that measure 48cm c-c. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine The bars on the Libre DL are wide, with our test bike coming with flared bars that measure 48cm c-c. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

The Libre’s mounting points and versatility set you free to explore the backroads or world, but you’ll have to decide for yourself whether you want hydraulic brakes and a carbon frame if you’re weeks from the nearest shop. The Libre’s playfulness is at home on the longest day trips in any conditions, and I imagine through domestic bike packing and touring. On that latter point, I only rode the Libre unburdened.

[caption id="attachment_132647" align="aligncenter" width="600"]The Kona Verso Carbon Touring fork comes with several mounts for racks. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine The Kona Verso Carbon Touring fork comes with several mounts for racks. Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine[/caption]

I mostly rode the 45mm Riddler tires at 20 psi and even then, road miles were not sluggish. That pressure seemed the magic amount for my forays through the forest and onto mountains, over dirt roads and through sinewy single track studded with rocks, roots and eroded ruts. The side walls did not fold nor bottom out for the majority of obstacles, yet the tires absorbed the small bumps.

The frame is stiff, which gives it good road manners, but that design transfers a lot of surface bumps up to the rider. The ride down a long bumpy hard-packed trail was not harsh or jarring, but I wouldn’t call it plush. I would call it “controlled stiffness.” Handling remained sharp under steering input. The fork did not yield any odd handling quirks from lateral bending in the narrow slow tight sections of trail.

The Easton A70 AX gravel wheelset mated with the Riddlers perfectly and the wide rims supported the side walls better than a narrower rim would. With the big tires, I did not bottom out onto the rim, so I never tested the dent resistance of the aluminum alloy. The 28 3x spokes certainly make for a well-tensioned and supported rim to keep things running round and true. Rolling out of the shop with such a nice set of trouble-free wheels as OEM equipment is a bonus.

I’m undecided on the single-ring setup for the gravel adventure bike. The included gear spread is good with a 98-inch top gear with a 26-inch low gear, but the jumps are large for long days in the saddle. If you want a double, it comes as standard setup with the Libre that uses the same frame with 650b x 47mm tires on road-plus wheels.

The Verdict

If you are looking for a gravel bike that has a slant toward the off-road adventure, the Libre DL has plenty of flare and deserves a look.

The Libre DL with 700x wheels is light and nimble, with great geometry to keep the bike stable should you strap a load to all the lashing points on the bike.

The bike is well thought out and is a complete package as equipped. The T30 Torx through axles should be changed to a hex key or levered axle, or you’d better make sure the T30 is taped to the bike so you won’t forget it.

For more on the Kona Libre DL, see the specs and photo gallery below.

Kona Libre DL Gravel/Adventure Bike Specs

MSRP: $4,000
Frame: Kona Race Light Carbon Fiber monocoque
Fork: Kona Verso Touring Carbon Fiber with carbon steerer: 1 ⅛” -1 ½”
Weight: 19.0 pounds, no pedals; 10.8lbs without wheels or pedals
Shifters: SRAM Force 1 HRD 11-speed
Crankset: SRAM Force 1, 40t X-Sync chain ring
Rear Derailleur: SRAM Force 1
Calipers: SRAM Force HRD
Rotors: SRAM Centerline, 160mm front, 160mm rear
Wheels: Easton A70 AX tubeless aluminum rim, Centerlock disc hubs 14ga rear/15ga front
Tires: WTB Riddler, 700c x 45mm, tubeless
Cockpit: Kona Aluminum, 8cm stem, 48cm flared bar
Seatpost: Kona Aluminum 31.6mm, two bolt clamp
Saddle: WTB SL8 Pro
Warranty: 6 years, frame and fork (original owner)
Country of origin: Taiwan
More Info: konaworld.com

Photo Gallery: Kona Libre DL Gravel/Adventure Bike

Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine

Kona Libre DL Gravel/Adventure Bike. © C. Lee / Cyclocross Magazine

The post Ridden and Reviewed: Kona Libre DL Carbon Gravel/Adventure Bike appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

NAHBS 2019: T-Lab All-Terrain X3 Titanium Gravel / Adventure Bike

$
0
0

T-Lab is a new company formed in 2016 by the team behind Guru, the defunct producer of high-end custom bikes. Unlike its predecessor, T-Labs concentrates on one material, titanium.

At NAHBS 2019 the All-Terrain X3 gravel / adventure bike caught our eye.

[caption id="attachment_133128" align="aligncenter" width="1140"]T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The X3 has some unique features to set it apart from the multitude of other titanium bikes we saw at NAHBS.

T-Labs cold-forms Grade 9 titanium (3Al/2.5V) titanium alloy in a mold to yield the final tube shape. Those shapes include radically flattened tubes at certain weld junctions and in certain locations along the tubes.

[caption id="attachment_133119" align="aligncenter" width="1140"]T-Lab cold-forms its titanium tubing. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab cold-forms its titanium tubing. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

Co-Owner John Anagostopolous told us that T-Lab’s analysis showed that the shapes chosen in the locations chosen will offer stiffer tubes for more efficient rider energy transfer without a weight penalty. Ride quality will actually be enhanced is the claim.

[caption id="attachment_133118" align="aligncenter" width="1140"]T-Lab flattens some of the tubes for a claimed better ride. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab flattens some of the tubes for a claimed better ride. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The three-piece welded head tube saves the need to machine a billet of titanium, the typical method. Machining a head tube is time-consuming and has a lot of material waste. The three-piece design enhances flexibility in frame fabrication.

[caption id="attachment_133122" align="aligncenter" width="1217"]T-Lab Bikes is based in Montreal, where it builds its titanium bikes. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine T-Lab Bikes is based in Montreal, where it builds its titanium bikes. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

T-Lab also has a unique rear wheel attachment. These used to be called dropouts, as the wheel would drop out when the quick release was opened. The new standard for drop bar bikes is 12x142mm thru-axle.

T-Labs developed a system where the machined axle mounts include the derailleur mount on the drive side and the disc caliper mount on the non-drive side. Those pieces are bolted to the rear triangle. This allows interchangeability and more flexibility in frame production.

[caption id="attachment_133123" align="aligncenter" width="1094"]The X3 has unique machined axle mounts. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The X3 has unique machined axle mounts. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

T-Lab picked a BB386 bottom bracket shell to allow a wider chainstay stance for better tire and crank arm clearance. The X3 can fit 700c x 44mm tires or 650b x 51mm.

[caption id="attachment_133124" align="aligncenter" width="1258"]The X3 has lots of clearance to aid in adventure. T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine The X3 has lots of clearance to aid in adventure. T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine[/caption]

The X3 frameset with a T-Lab carbon fork starts as $4,200 USD. The claimed frame weight is 1,200 grams.

The X3 build on display with the single ring Rotor 3D crankset weighed a claimed 17 pounds.

For a closer look at the T-Lab All-Terrain X3, see the photo gallery below.

More info: t-lab-bikes.com

Stay tuned for more handbuilt bikes from 2019 NAHBS show in Sacramento.

Photo Gallery: T-Lab All-Terrain X3 Titanium Bike

T-Lab Bikes' X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

T-Lab Bikes’ X3 titanium gravel / adventure bike. 2019 NAHBS Sacramento. © A. Yee / Cyclocross Magazine

The post NAHBS 2019: T-Lab All-Terrain X3 Titanium Gravel / Adventure Bike appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

The Gravel Good Life: Corey Godfrey and Gravel Worlds Get Ready for Year 10

$
0
0

2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

Gravel Worlds co-race director Corey Godfrey got his start in cycling racing mountain bikes, but when he moved to Lincoln, Nebraska after grad school, he found a new passion.

“Moving out to Lincoln, we have one park here, it’s nice, it’s flat. It’s only about a 10 to 12-mile [singletrack] loop,” Godfrey said. “When it’s wet, it’s pretty hard to ride that, so I started riding gravel to stay in shape.”

In a story that is common in the gravel world, Godfrey eventually started his own race called the Good Life Gravel Adventure, inspired by Nebraska’s unofficial state slogan.

The Good Life Gravel Adventure then became Gravel Worlds, a tongue-in-cheek name inspired by the Single Speed World Championships.

The race now enters its 10th year in 2019, and as always, Godfrey and his co-race director Craig Schmidt are doing their best to keep things fresh.

“We try to do something different every year,” Godfrey said. “It’s just fun. We started this thing as a fun event, and we want to keep it fun. When it’s no longer fun, we’re honestly going to stop doing it.”

Gravel Worlds is a fun, but challenging event. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

Gravel Worlds is a fun, but challenging event. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

A new category at this August’s Gravel Worlds is the L’Eroica vintage steel bike event, challenging riders to ride the 150-mile course on a pre-1988 bike.

For the less hardcore, the race will offer a 50-kilometer Buccaneer ride for those new to gravel.

Returning, of course, will be the sword—or cutlass, for those who speak pirate.

“There are all these different pirate swords you can get. We’re trying to figure out what kind of sword we can get that will allow us to include something on the blade and even the hilt,” Godfrey said. “A lot of big decisions to be made.”

The sword ... or cutlass ... will be back in 2019. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

The sword … or cutlass … will be back in 2019. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

I recently chatted with Godfrey about his race and what it is like to be a race director for a growing race like Gravel Worlds.

You can read a transcript of our conversation below. For information on how to register for the August 17 race, visit the event website.

For a look at what you can expect from Gravel Worlds, see the archive of our coverage from the 2018 race.

Interview: Gravel Worlds Race Co-Director Corey Godfrey

Cyclocross Magazine: Do people call you the godfather? Is that your nickname around Lincoln?

Corey Godfrey: No.

CXM: Has anyone ever called you that before?

CG: No, I guess I’m kind of a patriarchal figure here in Lincoln at times, so I think you could probably call me the Godfather, but mainly my nickname is Cornbread. I don’t know if you heard anyone call me that.

CXM: I did not hear that at Gravel Worlds. But that makes sense though. You’re from Nebraska, there’s lots of corn. Is that the story?

CG: No. When I first moved here and started going to mountain bike races, I didn’t know a lot of people, so I made cornbread. I got on this cornbread kick and started bringing it to mountain bike races.

People were like, “Hey, where’s that tall cornbread guy?” I would pass out cornbread after the races and it kind of stuck.

CXM: That is awesome. To start, I know a little bit about you, we spent some time hanging in Lincoln last year, but you’re the race director for Gravel Worlds, you do a lot of gravel cycling. What’s your background in doing long rides on rough roads?

CG: I started mountain bike racing, mainly cross country, then moving out to Lincoln, we have one park here. It’s nice, it’s flat, but it’s only about a 10 to 12-mile loop. When it’s wet, it’s pretty hard to ride that, so I started riding gravel to stay in shape. I started doing 12-hour races and did a handful of 24-hour mountain bike races, so long gravel rides made sense to train for those.

Then Guitar Ted had Trans Iowa, so I gave that a shot, and the same year I did DK. From there I kind of got hooked into the gravel scene. It’s pretty low-key, you don’t have to have a race license.

I started a race here in Lincoln called the Good Life Gravel Adventure. “The Good Life” is kind of the unofficial state slogan of Nebraska. We had 25 people show up and it kept building. The next year was 50, and then we called it Gravel Worlds the third year. It’s been 10 years now.

CXM: One thing that I thought was really cool was in your basement there’s a Dirty Kanza winner’s trophy.

CG: Yeah, Joel Dyke made that. He was one of the two original founders of Dirty Kanza. It was Jim Cummins and Joel Dyke. Those guys heard about Trans Iowa, and they were like, hey, how about we do something down here in Kansas.

They looked around, because Joel was originally from the KC area, I’m not sure if Jim was from Emporia or not. They decided on the Flint Hills, it’s kind of a unique landscape. So as Dirty Kanza got bigger, Joel didn’t necessarily like the direction it was going, so he stepped away.

Tragically, probably eight years ago or so, the day after Christmas he was in his garage trying to get something down and he fell down and hit his head. His wife found him the next day, but it was too late. He passed away.

Joel made that trophy. It’s a special trophy for me, knowing that he made that. I knew Joel for many many years, and he was kind of my doppleganger. He was 6’5″, tall dude, goofy looking dude. I definitely miss him. Every year we have been giving some money to his wife because he also had a young child.

CXM: You guys had a tragedy in your community as well. You had the KOM, correct?

CG: Yeah, the Randy Gibson KOM award. He was killed by a drunk driver in September of 2017.

Alison Tetrick won the Randy Gibson QOM jersey presented by his wife Christy. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

Alison Tetrick won the Randy Gibson QOM jersey presented by his wife Christy. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

CXM: It seems like a really community you have built around your race. How have you been able to grow the gravel community in Lincoln, as you have?

CG: It’s really been organic. As more people just show up for rides, we’re very welcoming. We help tutor people and take them underneath our wings and really embrace offering free events to new folks so they don’t have to go out and buy a race license just to try something out.

The Pirate Cycling League usually does something called the Tour of Dirt Roads every year. It’s basically just a longer dirt-road ride. We try to string together as many B-level roads around here together. It’s a good chance for folks to kind of get their feet wet.

Then just the number of races popping up here. There are several around Lincoln now. That’s really helped grow the sport. Obviously, a lot more bikes are available now.

If you look at just in general where road racing and mountain bike racing are going and then you see where gravel is going, it’s just taking off. That’s kind of what everyone wants to do now.

CXM: Lincoln strikes me as a comparable community to Madison, where I live. We have a strong cycling culture, but it’s not super cohesive. Do you think it’s been a little bit easier being in Lincoln out on the plains building that community? Or is something you’ve had to work at?

CG: You know, we’ve definitely had to work at it. We used to have a standing Wednesday night gravel group ride. Cycle Works always hosts a Saturday morning group ride where they often jump on gravel. Making sure those rides are announced and opening them to everybody. They’re super inclusive, all of our rides with Pirate Cycling League are super inclusive.

I’m not sure what it is we have here in Lincoln. Maybe it’s the lack of other things like sweet singletrack. I don’t know if you guys have a lot of singletrack, but you do have a lot of pavement.

What we do have here is a lot of gravel. If you just look at what’s the safest thing to ride, what’s the most beautiful thing to ride, what’s challenging, what’s good for new riders and any skill level, it’s going to be these gravel rides.

CXM: I saw you were at Land Run, it was quite dry. When you go to events like that, do you kind of think about how you can incorporate things from other races into Gravel Worlds.

CG: I always like to learn from other organizers, especially Bobby and Crystal [Wintle]. Those guys do an amazing job down there. It’s kind of hard to match what they’ve done. You need to get down there and check it out if you haven’t.

CXM: I’m well aware that I need to get there. I was have super FOMO doing all of our coverage of the race this year. I will be trying to make it next year.

CG: Something cool about Land Run and what we’re trying to do too is we don’t want price to be a barrier. We try to keep our cost super low. Obviously, we have to try to break even and cover our expenses. As you get more people coming in, there are more expenses.

Land Run is $80, we’re $80. We’re not a $200 event. You also have to spend money getting there, on lodging, on food. If you have a $200 entry fee, you can end up dropping over a grand on one gravel race.

Some things I like to learn from going to other races is how they do aid stations, how they do check-in, how smoothly things run. I picked up a couple things from Land Run. They had a really slick way to do the check-in with the numbers. Basically, you have a stack of numbers, nothing is pre-assigned. You grab a number and they put it in BikeReg, and you move on to the next. I think we’re going to try to emulate that this year.

The expo, it’s always great to see how they do that. See who’s showing up at the expo, and if there’s anything different there. They did the Salsa Chaise lounge, I need to get those guys to Gravel Worlds. I’m doubt it’s going to happen this year, but maybe next year.

Andrea Cohen, she rides for Salsa, she did a really welcoming and inclusive ride on Friday at Land Run. She’s going to come here to Gravel Worlds and do that ride as well. Maybe an hour, hour and a half ride on the first 20 miles of the course. The goal is to allow people to stretch their legs, especially if they’re been in the car all day, and just get people together. Also folks who are traveling with a racer, they mind as well get out and ride a little bit too.

Those are some things I’ve learned, but we’re always trying to do something different. We don’t want to be just like everybody else. We’re kicking around a few other ideas for this year.

CXM: You said this is your 10th year coming up, right?

CG: Tenth year for Gravel Worlds, right.

CXM: That’s super exciting. I went last year, it was a great event, I had a great time. Can you let in on some of the things people can expect this year?

CG: We’re going to do the Randy Gibson climber deal. Another tragedy that happened in 2017 was we lost our other friend Christopher van Oyen, he passed away from a very rare disease. He would usually be out on the course doing what we called “Gravel Angel.”

We have these pop-up oases that you can stop at if you want, and we would usually have CvO just drive around, and if he saw someone struggling, he would stop and help them out. That was kind of a pre-approved neutral support. We don’t want friends and family doing that, but he was approved for that. We may do something to honor Chris this year and have some Gravel Angels out there.

We are also going to have a L’Eroica cateogry. Vintage bikes, pre-1988 bikes. Downtube or barcon shifters. Non-aero wheels. Steel frames. Kind of a unique category. I don’t think a lot of gravel races have done this. We’re going to add that cateogry for women and men. Instead of the traditional Gravel Worlds jersey, we’re going to have a custom wool jersey for the top female and male.

We going to try to make the expo bigger this year. We’re having a really big raffle Saturday night at the award ceremony.

CXM: I saw you posting about the L’Eroica cateogry on Facebook, so I’m excited you’re going for it. I take it you got a lot of interest from that?

CG: There were several people who know a lot more about this kind of event than I do. They were giving me all these tips. “You need to allow these things in too.”

I didn’t even know what a barcon is. Sure, barcons are in, are they pre-1988? If they are, super. I would prefer down tube shifters and super old-school steel bikes. Non-aero levers. We’re encouraging leather saddles, it would be really cool if people wore wool jerseys.

We’re going to have kind of a committee pre-approve the bikes. If someone signs up for the category, we’re going to have them send us pictures and specs. We’ll make sure they’re pre-approved.

I’d like to have those people bring their bikes to the expo and at 6 p.m., line them up and let people see who these crazy people are who are going to try to race 150 miles on these vintage bikes.

The nice thing about the gravel around Lincoln, you saw it, it’s definitely doable on a road bike. It’s not going to be the most comfortable thing, but it is doable.

CXM: That sounds like one of those old car shows. Everyone gathers at the local McDonald’s or whatever and show off their cars.

CG: Exactly. That’s what we’re going for.

CXM: What I want to see is like Alison Tetrick and Colin Strickland all racing on steel bikes. Any chance we can make that happen?

CG: Oh man, that would be awesome. You never know. It would be pretty cool if Specialized could dig up an old steel road bike for Alison. That would be some cool PR for her.

I don’t think Colin is coming, Amity [Rockwell] isn’t coming. With the Steamboat race, a lot of the top people are heading there. We think Alison is coming because supposedly she doesn’t racing at elevation. We’re really hoping she makes it because she’s always a fun part of the race.

And this year, we’re going to give her race number one. She’s the only one we’re going to make an exception for.

CXM: You better. You guys got burned by her last year.

CG: It was awesome. That was hilarious. Right there at the check-in, she grabbed a Sharpie and crossed it off.

Tetrick MacGyvered a number one name plate for her title defense. Alison Tetrick's 2018 Gravel Worlds S-Works Diverge Gravel Bike. © Z. Schuster / Cyclocross Magazine

Tetrick MacGyvered a number one name plate for her title defense. Alison Tetrick’s 2018 Gravel Worlds S-Works Diverge Gravel Bike. © Z. Schuster / Cyclocross Magazine

CXM: I look at an event like Land Run and they’re doing a great job keeping it grassroots even though it’s grown. They had a number of top riders come to their race this year. You guys have kept it a little bit smaller with the grassroots vibe. Is that a decision that you’re rethinking at all.

CG: Well, we were expecting to sell out pretty quickly this year. We’re maxing at 750 participants. We’re ahead of where we were last year, but we want to make sure the growth is sustainable and controlled. Last year we had over 500 people sign up and over 400 people raced. I don’t want to jump to like 1,000 people and then find out we have major issues handling that volume at check-ins.

We’re also trying to be really respectful of the people in that neighborhood. It is a neighborhood. They’re really excited about the event, the neighborhood association is really jazzed about us growing a bit this year, but we want to make sure we do it in a smart, respectful manner so we don’t run into any snags.

CXM: You say we. Your co-director is Craig, right?

CG: Craig Schmidt, yeah.

CXM: The two of you guys do the brunt of the work, right?

CG: Craig and I kind of run the show.We have a small business. When Gravel Worlds started, it was basically me with a clipboard. Then Craig jumped on and started taking on more and more responsibility to help me out because it just kept on growing.

We never charged an entry fee for the first seven years. It was a postcard entry you sent to my house. Then we started having them sent to Craig’s house because he likes receiving mail.

It was really cool. People would send really creative postcards. Somewhere at my house I have all these postcards from over the years.

Then after a while, we started getting people coming from all across the country, and we had to start thinking about liability. If someone were to get hurt, who’s ultimately responsible, and it would be Craig and me. We decided to form a LLC, and that’s when we reluctantly had to start charging an entry fee to cover insurance. And to cover making sure we could put on a quality event.

This year I think I’ve seen a pro mountain biker from the Ukraine sign up, we have a former pro roadie from New Zealand, we have some people from the UK, from Canada, Iceland, the Lauf guys are coming. It’s become a much more kind of international race.

Initially, calling it Gravel Worlds was kind of tongue-in-cheek, kind of like the Singlespeed World Championships. That was kind of what we were going for. Now we have some people who are really wanting to race and win this event, so we’ve definitely had to step it up. Craig has been a key part of that, making it bigger and better.

CXM: Everyone wants the sword, right? Will the sword be back?

CG: Yep, the sword will be back. I’m actually doing some sword shopping today. Last year we had, I think, a cutlass. There’s all these different pirate swords you can get. We’re trying to figure out what kind of sword we can get that will allow us to include something on the blade and even the hilt. A lot of big decisions to be made.

We found a couple riders who have done the event all 10 years. We want to do something to recognize those two guys. Have you ever heard of a blunderbuss?

CXM: Isn’t that a gun?

CG: Yeah, it’s like this crazy gun who stuff whatever into and use it to storm another ship. If someone sees you with a blunderbuss, it’s like, crap, get out of the way.

We’re looking to do something with a blunderbuss theme. I’m pretty anti-weapons and violence, but we’re trying to stick with the cheesy nautical pirate theme, so we’re looking for like a blunderbuss mug. We’ll do something like that this year.

We thought about doing something to recognize people who have raced five years too. We need to tally those up still.

CXM: The way your race is set up, it’s on the north side of Lincoln, it finishes at a restaurant, so it doesn’t necessarily have the finish of a Land Run or Dirty Kanza.

What I thought was really cool was how everyone, Elites included, hung out at the Schilling Bridge after the race. It was a really neat party. Do you think about switching that at all, or is it working so well that you’re going to stick with it?

CG: It’s working so well. The nice thing is being on the north side of town, besides the Fallbrook neighborhood being so welcoming and the Schilling Bridge owner has been awesome to work with, we’re only about a mile from the finish line to gravel. There’s not a lot of having to meander through town to actually get to the gravel.

We think it’s a lot safer too. There’s a lot less traffic. Lincoln is 300,000 people, so it’s pretty big. To get like downtown, it can take you 20 minutes to get from downtown to the gravel. We really like the location.

The hillier stuff, what we call the Bohemian Alps, that’s actually what they’re called because a lot of folks from Bohemia settled there, it’s hilly. We like to offer a challenging course for folks. The hills are right there and it’s tough from the get-go, and it’s tough when you finish.

CXM: I had never been to Nebraska before your race. For folks interested in coming, what can they expect to see and what might they be surprised by?

CG: Definitely, if you just drive through Nebraska on Interstate 80, the corridor is pretty flat. If you go a little bit north and south of that corridor, and it can get pretty hilly. The terrain can get pretty diverse.

Our mayor this past week, he talked about some things Lincoln has to offer for folks, we were talking about trail development. He hit the nail on the head when he made a comment saying Nebraska and Lincoln don’t have mountains, it doesn’t have a sea or a huge lake, but what we do have are the plains and the people.

That’s exactly what we have and what makes this area great. Very similar to the Flint Hills in Kansas, they don’t have the sea or the mountains, but they have the Flint Hills. What we have are these rolling plains which are just beautiful.

Think about Dances with Wolves, that kind of scene. Beautiful, rolling grassy stuff, we have a lot of that around here. And obviously corn and soy.

Also, some really good people. The small towns we go through, they’re very welcoming. Valparaiso, they saw us going through there for the race, and on our ride once, someone approached us and said, “I’m the leader of the Boy Scout troop. Would it be cool if we set up a vending spot at the gas station here for your riders?”

Same thing with the town of Malcolm. They wanted to raise money for a baseball field for the kids. They approached us, and we were like, absolutely. We helped them raise money last year.

What we have are really awesome gravel roads that are maintained really well. The course is really challenging. It’s not one big climb, but it is climb after climb after climb. Over the 150 miles you can expect about 10,000 feet of climbing.

And then we have really awesome people who help run the event. Volunteers, local communities, the folks at the party at the end. That’s what makes Lincoln great.

I’m not from Lincoln orginally; I’m from Cleveland, Ohio. I came out here for a job after grad school. I had a contract for two years, and I figured I would finish up my contract and move to Colorado. That was my plan.

I’m here 20 years later man. It’s a really awesome place. I always say, I don’t want to tell too many people because Lincoln is kind of a jewel. Low cost of living, great people, if you want to start something you can do it.

A perfect example is Gravel Worlds and Pirate Cycling League. We didn’t have anything like that, so we came up with an idea, and people embraced it. We have gotten a lot of community support.

There are plenty of hills at Gravel Worlds. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

There are plenty of hills at Gravel Worlds. 2018 Gravel Worlds © Z. Schuster / Cyclocross Magazine

CXM: With Gravel Worlds, how did you decide on the 150-mile distance?

CG: We wanted to do something more than 100, but we didn’t want to do something as long as the Dirty Kanza. When we first started doing the event it was in September, part of it was honestly because of daylight. I didn’t want to be waiting until like three in the morning for folks. We compromised and put it at 150.

We talked about dropping it down, but people commented that they really wanted to do 150. That’s why we started offering the 75-mile Privateer event a few years ago. It lets folks who can’t do the 150 do a shorter event.

This year we’re offering something even shorter. It’s a 50-kilometer ride called the Buccaneer, and it’s sponsored by Chamois Butt’r. It’s for people who want to get their feet wet and don’t want to do a longer rider. Folks who are traveling with their significant others who want to at least get a ride in, that’s an option for them.

CXM: It’s really cool that so many gravel events are offering shorter distances. Are you seeing a positive response to adding those shorter routes for beginners?

CG: Definitely. That’s one of the things we talked about before, how inclusive gravel is. If folks can’t do 150 or 75 miles, they’ve been left out, but now, we are able to offer a shorter distance. I’ve been wanted to do that for a while now. I’m glad we’re able to do it.

Hopefully the 50 kilometers will be doable for most folks. We’re going to try to keep it pretty flat and close to Fallbrook, so people can still get a ride if they have to bail. Even younger folks who want to give it a shot.

You’ve got a lot of folks getting into gravel after riding road or mountain bikes their entire lives. Maybe they don’t feel safe on the road anymore. The gravel roads are much less traveled around here, so it gives them a lot of options.

CXM: You guys have a lot going on this year! You’ve mentioned three or four things now.

CG: We try to do something different every year. It’s just fun. We started this thing as a fun event, and we want to keep it fun. When it’s no longer fun, we’re honestly going to stop doing it. Keeping it lighthearted and fun is important for us.

That keeps with our Pirate Cycling League mantra. We try to keep things really inclusive and fun. Most of our events are free. That’s what we’re trying to do.

CXM: To be honest, 150 miles is probably at the limit of what I can do. I signed up, but I’m still a bit nervous about being ready.

CG: You know, it is 150 miles, but we have those checkpoints and those oasis stops. We think those make it a little bit more doable. It lets you break it down into smaller chunks. You could definitely turn yourself inside out and not stop at the oases, but you’re going to suffer. If you have a good time, hang out at some of the oasis locations, chat people up, it’s just like a long group ride.

CXM: Awesome. I am excited. Thanks for your time.

CG: Yeah, thank you. See you in August.

The post The Gravel Good Life: Corey Godfrey and Gravel Worlds Get Ready for Year 10 appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Courtenay McFadden Gives Gravel a Try, Comes Out Sore but Satisfied

$
0
0

Courtenay McFadden rips powers through the mud. 2019 GP Sven Nys, Elite Women - DVV Verzekeringen Trofee. © B. Hazen / Cyclocross Magazine

There’s really no better way to find out if something lives up to the hype than to try it out for yourself.

Such was the case last weekend for Courtenay McFadden (Pivot Cycles/Maxxis p/b Stan’s/DNA Cycling).

McFadden grabbed her Pivot Vault, slapped on a front derailleur and some Maxxis Ramblers and headed to the hills at Washington’s Cascadia Super Gravel.

“You can say I dove into the deep end without knowing how to swim,” McFadden said about the experience. “I asked friends who had done the event how hard it was and what gearing I would need.”

The Cascadia Super Gravel event packs 7,700 feet of climbing into a 70-mile course. Needless to say, McFadden got the full gravel experience.

Being able to grind gravel for five-plus hours was a victory in and of itself for McFadden.

McFadden had hip surgery in February 2017 and 2018, which has left her recovering during the spring and summer during the last two cyclocross offseasons.

“Also, this is the first time in three years I’ve been able to go out and just ride hard and totally bury myself without being too worried or concerned about my hips post-surgery, and in March nonetheless,” McFadden said. 

“Last year at this time I wasn’t even allowed to pedal outside or longer than one hour on the trainer!”

We know McFadden got her money’s worth from the gravel race. At the end, did she get something back from the tough course?

“It was a fun and competitive yet low-key and friendly scene that I understand the draw to it now,” she said. “Before I did this event, I wasn’t sure why people did gravel, but I see now.”

We chatted with McFadden to get the full story of her first gravel experience.

Interview: Courtenay McFadden on Her First Gravel Race

CXM: What gravel event did you do?

Courtenay McFadden: I raced the Cascadia Super Gravel here in Washington.

CXM: You said this was your first one? What was the motivation for doing it?

CMcF: I know my sponsors would love to see more gravel events on my schedule, with gravel gaining so much media attention and traction, plus the engagement and amount of people participating at the events, it’s a great way to spread brand awareness. 

For me, it was also a great way to see local biking friends I don’t see often because I’m not racing as much locally, especially after two hip surgeries, I haven’t been at any spring or summer events the last two years. 

Also, this is the first time in three years I’ve been able to go out and just ride hard and totally bury myself without being too worried or concerned about my hips post-surgery, and in March nonetheless. 

Last year at this time I wasn’t even allowed to pedal outside or longer than one hour on the trainer!

CXM: Jamey [Driscoll] has some gravel experience, have you talked with him or others about gravel?

CMcF: You can say I dove into the deep end without knowing how to swim.  I asked friends who had done the event how hard it was and what gearing I would need. I didn’t have enough gears. Not sure if anything would have been enough. 

I also didn’t really know the best water situation, two bottles? Three bottles? hydration pack? Stop at the aid stations? I just went in blindly and hoped for the best.

CXM: Did you ride your Pivot Vault? Which tires? I guess being a tubeless team helped?

CMcF: I did ride my Vault because that bike is rad and you can take it anywhere!  I rode the Maxxis Ramblers with the Stan’s Grail CB7 Pro Wheels.  I don’t know what pressure I rode because I never checked. Like I said, I just jumped in blindly.

I set the wheels up a couple days before the event, and the Stan’s wheels hold air really well, so I just trusted they would be fine. I also didn’t bring any tubes with me or anything for a flat repair except for a pump, I was seriously unprepared, but I had no issues with flats, and there were a lot of flats out there. Trust your system! 

If I’m being honest, I haven’t carried a tube with me in a long time.  I know thats not the best system, but so far it’s been okay.  😛  

CXM: Any other changes to your bike?

CMcF: I added a front derailleur because I knew my 1x system wasn’t going to be enough, and my rear derailleur wasn’t going to fit a larger cassette. It was also cheaper to buy a front derailleur than a rear derailleur and new cassette. 

I added the double Easton shifting rings as well and was hoping for the 47/32t but those were out of stock. I was unprepared and asked for it about four days before the event and ended up with the 50/34t. 

To add to my complete unpreparedness for the event, I was frantically trying to get the front derailleur installed on my bike the Friday before the race (because I ordered it the Tuesday before), but I didn’t have the double rings yet, so the shop installed it.

But it wasn’t fine-tuned until about 1 a.m. the night before the race when Matt Hornland from Easton helped me out. We’re thankful for YouTube.

CXM: Did you race race or more enjoy the ride?

CMcF: Given this was the longest ride I’ve done since 2016 and the hilliest, I was prepared to go in and enjoy the event and try to survive. Surviving was literally my goal … and maybe finish around the five-hour mark. 

I’m not sure people understand what I wasn’t able to do and how I wasn’t able to train all that much after my hip surgeries, and how actually being able to finally do an event like this has been huge for me, so I was looking to enjoy the ride. 

I also took five weeks off the bike, so I really had only been “training” for about 3.5 weeks prior to this event, so I went into the event with the goal to chill out. 

However, throw a competitive person into a race and all intentions go out the door really fast. The race started on pavement, and I swear people took off like rockets! I tried to hang as long as I could, but about 15 minutes in when my heart rate was 180, I decided if I wanted to survive I should slow down and just decided to take it at a pace I knew I could finish with. 

I had intentions of relaxing at the aid stations and taking my time filling up my bottles, maybe eat a snack or two, but then I realized that the groups didn’t stop at the aid stations and I would be all alone if I stopped for too long. So I frantically filled up my bottles and chased back on.  

About two hours in I started to feel pretty good and my legs remembered how to climb. So that was cool. After about four hours, I wanted to curl up and cry.

Instagram Photo

CXM: You mentioned you are really sore from the ride, which part of your body does hurt the most?

CMcF: My hands, wrists, and forearms are insanely sore.  My hands hurt to make a fist!

CXM: What did you think of the gravel scene?

CMcF: It was the longest I have ever suffered on a bike in my life. My average heart rate was 171, and my legs were fried. It was so hard! 

I tried to chat with as many people as I came up on to help me enjoy my ride, and so I met some great people who felt like my shining angels when I wasn’t sure I was going to survive. 

I liked hanging out after the event as well, and it was sunny and warm and made me want summer!  It was a fun and competitive yet low-key and friendly scene that I understand the draw to it now. Before I did this event, I wasn’t sure why people did gravel, but I see now.

CXM: Are long rides like this normally part of your cyclocross training?

CMcF: Yes, they sure are! But not the last two years because of hip surgery.

CXM: Plans on doing more gravel?

CMcF: Yep! I’ll probably do some more local stuff and will plan to be at the Lost and Found in June.

CXM: I know it was a tough season for you. You fully recovered from the leg thing now?

CMcF: Um, sort of yes and no. I have a very large ball of scar tissue on the side of my leg from the hematoma, so I’m still trying to work on that. The leg still does feel weaker than my right leg, and I think over all that hip and glute strength still needs to get stronger. 

I’ve been having some back issues since the Pont-Chateau World Cup that I’m working through, and I’m actually wondering if it’s related to that leg thing/scar tissue. When you put your body through the wringer like we do, we have to take care of it a little more.

McFadden wrapped up her season in Europe after U.S. Nationals Elite Women. 2019 Hoogerheide World Cup, GP Adri van der Poel. © B. Hazen / Cyclocross Magazine

McFadden wrapped up her season in Europe after U.S. Nationals Elite Women. 2019 Hoogerheide World Cup, GP Adri van der Poel. © B. Hazen / Cyclocross Magazine

CXM: Awesome to hear you’re enjoying the gravel thing. Looking forward to seeing the stories from the rest of your races this year.

CMcF: Thanks. Looking forward to it as well.

Featured image: Bart Hazen

The post Courtenay McFadden Gives Gravel a Try, Comes Out Sore but Satisfied appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.


Ridden and Reviewed: Thesis OB1 Carbon All-Road Bike

$
0
0

Our demo bike was set up with 650b road-plus tires and a dropper post. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine

Thesis Bike co-founder Randall Jacobs is a bike industry veteran. He had once planned to go into the foreign service but felt disillusioned and changed course with the diversion of mountain bike racing.

In the bike industry, he found his calling, moved to Asia and learned Mandarin. For a decade he learned how the global bike industry worked.

Through this experience Jacobs thought he could deliver a better experience to the rider and local bike professionals. His observations:

  • The bike industry is hurting because of internet-price driven consumer
  • Local bike shops are saddled with inventory, but service is where the LBS excels.
  • People don’t know what bike to get.

Jacobs and his co-founder Alice Liu self-funded Thesis Bike and created one bike, the OB1, designed to be ridden anywhere.

The company’s website outlines the Thesis: “Keep it Simple” tops the list. So One Bike, with a nod to old Ben Kenobi: OB1, “Now that’s a name I have not heard for a long time.”

Thesis sent us a blue review OB1, and we put it to good use on all kinds of roads and trails.

[caption id="attachment_133415" align="aligncenter" width="1140"]Our demo bike was set up with 650b road-plus tires and a dropper post. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine Our demo bike was set up with 650b road-plus tires and a dropper post. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

Does Thesis pass the test of providing an all-road bike at home everywhere? Find out in our review.

The Frame

The OB1 has a Toray carbon fiber frame with an open mold design. Jacobs sourced the frame from a reputable Taiwanese manufacturer he knows.

Thesis produces the OB1 in small batches and sources materials from Asia with components curated from companies that follow the ethos of the Thesis founders.

Jacobs and Liu seek to offer a bike at a reasonable price with complete transparency about where the cost goes while helping support local bicycle professionals.

As a fluent Mandarin speaker, Jacobs is able to work with Asian companies to customize aspects of the frame.

[caption id="attachment_133424" align="aligncenter" width="1140"]The rear control lines are internally routed through the carbon frame. Thesis OB-1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The rear control lines are internally routed through the carbon frame. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

The geometry of the OB1 is fairly standard for a road bike with a 72-degree head tube angle, paired with a 73-degree seat tube, 42cm chainstays and a 7.3cm bottom bracket drop. Those measures combine to yield a 102.5cm wheelbase with a 616mm front center.

Our size L frame has a 57.0cm effective top tube and a tall 180mm headtube giving a reach of 388mm and a stack of 595mm.

The fork axle-to-crown height is also a road-bike-like 385mm, as compared to a cyclocross standard of 395mm.

Longer fork blades accommodate ’cross tire clearance with 700c wheels and mud clearance. This did not present a problem when I put a 700c wheel with a 40mm tire into the OB1 fork.

There is no cable access below the bottom bracket; the control lines run through the frame above the bottom bracket and are foam padded to keep them from rattling. There is a drain hole on the BB shell. The area behind the BB shell is smooth with no mud shelf.

A provision for a direct mount front derailleur is on the seat tube, either electronic shift or bottom pull cable.

[caption id="attachment_133422" align="aligncenter" width="1140"]The bike comes with a mount for a front derailleur, but our bike was set up 1x. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The bike comes with a mount for a front derailleur, but our bike was set up 1x. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

There are attachment points for fenders, a bento box, a rear rack and five water bottle cages, two in the usual spot, one on each fork leg and one beneath the down tube.

Fork blade mounts often have three bolts for a large format cage like the Salsa Anything Cage, but Jacobs did not like the idea that riders would load too much weight outboard on the fork. Low rider pannier racks will also fit on the fork, and the crown has a piercing for a front rack mount.

[caption id="attachment_133421" align="aligncenter" width="1140"]The carbon fork has bosses for an auxiliary cage and fenders. Thesis OB-1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The carbon fork has bosses for an auxiliary cage and fenders. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

A notable detail of the frame is the integrated reversed seatpost clamp. It offers a nice aesthetic while clamping the post in a secure fashion, unlike hidden bolt compression or wedge systems.

[caption id="attachment_133420" align="aligncenter" width="1140"]The seat collar is integrated and backward, which is a nice design. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The seat collar is integrated and backward, which is a nice design. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

The Build

Jacobs is equally proud of the parts mix he’s curated for the OB1. So much that on the website he explains his reason for choosing every part of the build.

One remarkable example his attention to detail is the DT Swiss 350 hubset on the Thesis-branded wheelsets.

If a buyer chooses to purchase two wheelsets with the OB1, Jacobs seeks out two hubsets from the same lot to assure easier exchange of the wheels without a brake caliper adjustment.

There are two basic build packages available for the OB1 presently based around wheel size and tire width. “The Shredder” is the 650b model and “The Roadie” is the 700c version.

Thesis also offers an “Omni Edition” package that offers two wheelsets, both with tubeless tires set up, rotors and separate cassettes for $1,300 more. (That’s four wheels, four tires, four rotors, and two cassettes!)

Our review sample Thesis OB1 had SRAM Force 22 shifters with a Rival 1 long cage rear derailleur that shifts across a wide-range SunRace 11-46 11-speed cassette.

[caption id="attachment_133423" align="aligncenter" width="1140"]Our OB1 demo bike came with a wide-range SunRace 11-46t rear cassette. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine Our OB1 demo bike came with a wide-range SunRace 11-46t rear cassette. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

The hollow-forged crankset has a direct mount single wide-narrow chain ring with 44 teeth, leaving a 108-inch top gear with a lower than one-to-one 26-inch low gear.

The left shifter actuates an internally routed dropper post cable, which is an option available for an additional $200. The post and cable add 250 grams.

The drop section of the black aluminum handlebar has a mild flare, the stem is forged aluminum. The slotted saddle has a short nose and wide rear, similar to the Specialized Power saddle.

[caption id="attachment_133418" align="aligncenter" width="1140"]Our bike's 42cm handlebar is slightly flared and the left shifter is set up to control the dropper post. Thesis OB-1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine Our bike’s 42cm handlebar is slightly flared and the left shifter is set up to control the dropper post. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

The Thesis OB1 comes with bar tape that matches the color of the frame, in the case of our review sample, a brilliant blue.

The bottom bracket is EVO 386 and Thesis uses a BB with cups that thread together, similar to the Wheels Manufacturing design.

[caption id="attachment_133414" align="aligncenter" width="1140"]Chainring clearance is one of the subtle and sometimes hidden customizations that Jacobs has specified though his close relationship with Thesis frame factory.. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine Chain ring clearance is one of the subtle and sometimes hidden customizations that Jacobs has specified through his close relationship with Thesis frame factory. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

The Thesis 650B wheelset has asymmetric rims with a 27.5mm internal width, perfect for the 47mm-wide tires. The wheels have 28 spokes with external nipples laced 2x around DT Swiss 350 hubs with Centerlock rotors for a durable build.

Our build came with 650b x 47mm WTB Byway tires that feature a relatively smooth tread.

The claimed weight for the tubeless wheelset is a reasonable 1,400 grams. Both the 700c and 650b wheelsets are available separately.

Our review bike weighed 21.3 pounds without pedals and 12.6 pounds with no wheels. That’s a bit heavy for a carbon bike, thanks in large part to the dropper post. The company said it is working on a lighter frame.

The Ride

​While reviewing the Thesis OB1, I got the chance to ride with Jacobs after a rainy day. With most of the ride off-road, it became evident that despite the large contact patch of the 47mm tire, the slick tread disallowed traction on wet soil or grass, even with the advantage of staying seated using the low 26 inch gear or descending with the dropper down and in the drops, butt hanging over the rear tire.

He’d set the bike up for me initially with the tires at 35 psi, which is a lot for me with such a high volume tire. Jacobs is a former XC mountain bike pro and intuitively knows that knobs are necessary for any serious off-road pursuits.

He will offer some knobby tire options in the near future as a customized request. He later swapped the WTB Byway smoothies for 650b x 47mm WTB Senderos that have a knob pattern similar to the WTB Resolute or CrossBoss.

That changed the experience for the off-road adventures, especially since rain punctuated our review period.

[caption id="attachment_133419" align="aligncenter" width="600"]The rear has a bridgeless seatstay. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The rear has a bridgeless seatstay. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

Though Jacobs likes the single ring option, he also knows some riders like smaller steps between gears and don’t feel the need for a dropper, so he will offer a double ring setup. I don’t mind the single ring set up as it frees up the left shifter to actuate the dropper post.

I dislike the look and shifting over the ultra-wide range cassette. I would prefer a 38t front ring with a 10-40t cassette on an XD driver.

However, Jacobs explained that availability, cost and weight made him decide on essentially the same range over larger cogs and freewheels, with an added benefit of offering slightly better wear properties.

The 42mm chainstays are 0.5 to 1.0cm shorter than most cyclocross bikes today. That has the theoretical advantage of making the bike more responsive, since more weight is over the rear wheel or because there is less flex of the stays.

These subtleties are not really felt on a bike with big soft tires. However, put on the road wheels and tires and you may think differently.

As discussed earlier, the 700c wheels with road tires have the same rolling diameter as the 650b rims with 47mm tires. That means with a wheel swap, the bike standover and geometry should be the same.

To me it made little difference. I rode the bike with 700c wheels and tires between 30 to 40mm wide and there were no dramatic handling differences. The standover height was noticeable but not bothersome since I primarily ride cyclocross bikes.

Compared to standard 7.0cm BB drop of many modern cyclocross bikes, the lower BB drop was not even noticeable. If I was coming from a high BB bike like the Sage PDXCX or the Fuji Altamira CX 1.1, then it might be apparent.

On the Thesis OB1, 700c wheels with slightly larger rolling diameter than cyclocross tires felt like a normal modern cyclocross bike due to the low bottom bracket the bike starts with.

The limitation of the shorter chainstays is that with 700c wheels, 40mm is the tire clearance limit, perhaps 42mm with a squeeze.

The widest part of the inner chainstays is for a smaller diameter. The bigger diameter also runs close to the seat tube. That’s not a problem, just a consideration.

[caption id="attachment_133426" align="aligncenter" width="1140"]The OB1 has clearance for 650b x 47mm tires. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The OB1 has clearance for 650b x 47mm tires. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

The OB1 is available with a package that includes both a 700c and 650b wheelset, each with appropriate tires, rotors and cassette.

Jacobs specs those bikes with the same DT Swiss 350 hubsets from the same production lots if possible for an easy “hot swapping” of the wheels. That means no brake caliper adjustments when switching between 700c wheels with 30mm smooth road tires and 650b with 47mm gravel tires.

The OB1 is a stiff platform. Take into account that I rode the bike with 47mm tires at 20 to 25 psi, much wider than habitual for me. I also rode the OB1 with various other 700c wheelsets with a variety of tires from 33 to 40mm, most typically at 25 -30 psi.

I am lucky to ride a lot of different bikes with various wheelsets and tires repeatedly over the same terrain. Tire compliance helps a lot, but you can still feel the heart of the bike.

Despite what some say, frame compliance plays a role in the overall ride quality. The stiffness is not objectionable and makes the bike feel racy and offers great road manners on pavement. Its ride quality is on par with the Fezzari Shafer.

With cyclocross wheels, 700c with knobbies, or with a monster cross setup, 650b with 47mm knobbies, the fun really began. The frame stiffness, short chainstays and quick front end made tight courses fun.

Despite my preference for a more compliant frame, this bike feels quick, responsive and racy. It handles fast courses with smoother track very well.

When the knobby WTB Senderos were on the Thesis, I can’t help but think of Jacqui Phelan’s drop bar Cunningham mountain bike. Only the brakes are better now, and the dropper post is better than a Hite-Rite.

The dropper post offers the novelty of moving the saddle out of the way for a steep descent or lowering the center of gravity for corners, all adding to the fun.

With the dropper down you can slide back over the rear wheel more easily and brake from the handlebar drops which increases your feeling of control on steep drops. There is no denying this makes descents addictively fast and fun.

I even found myself lowering the saddle a bit when approaching a corner on the road to better rail it. Sometimes I’d lower the saddle at a stop light to stay in the saddle with my feet on the ground just because I could.

The added weight, 250 additional grams up high from the seatpost is noticeable when you carry the bike and when you throw the bike around chicanes. The dropper post is certainly fun to have, especially handily paired to the left shift lever, and it makes the bike more capable.

[caption id="attachment_133429" align="aligncenter" width="600"]The dopper post made the OB1 extra fun. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine The dropper post made the OB1 extra fun. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine[/caption]

Many riders don’t have the luxury of multiple wheelsets easily swappable on a disc brake equipped bike. With the OB1 two wheel package, that becomes possible for an affordable premium considering the second wheelset comes with tires, rotors and a cassette.

Then you can have one bike that offers great on-road performance and very capable off-road performance.

Though swapping wheels is only a minor inconvenience for someone who likes to work on their own bike, the luxury of having the wheels pre-matched for rotor spacing is nice. You can make your ride decision on a whim knowing it will be adjusted.

The ability to fit 650b with wide tires and all the mounting points makes the OB1 a versatile bike, ready for bikepacking or a long adventure. The stiff frame will be advantageous with a load aboard. The chainstays are short so panniers are not ideal.

Jacobs prefers a frame bag to keep the heavy items low and centered, a preference of modern bike packers anyway. Long haul tourists will likely look for a longer bike specific for the task.

The Verdict

There’s no such thing as a quiver-killer, perhaps a quiver-reducer though. This is Jacobs’ thought of what that best one bike might be.

The Thesis OB1 is a versatile, fun bike, especially with the dropper post and the design around the 650b wheels with the ability to accommodate 700c.

Other similar bikes exist out there, but where Thesis differs is Jacobs’ thought for the sustainability of the bike industry, partnering with shops and local bike professionals. He also is delivering a great bike at a lower cost to the consumer.

We recommend the two wheelset package and the dropper post option. If you are looking for a bike that will cover a lot of ground, the Thesis OB1 should be on our short list.

For more on the Thesis OB1, see the specs and photo gallery below.

Thesis OB1 Specifications

MSRP: $3,300, $3,500 as tested with dropper post option
Frame: Thesis Carbon fiber, 12mm thru-axle, flat mount disc
Fork: Thesis Carbon Fiber with carbon steerer: 1 ⅛” -1 ½”, 12mm thru-axle, flat mount disc
Weight: 21.3 pounds, no pedals; 12.6lbs without wheels or pedals
Shifters: SRAM Force 22 HRD, 11-speed
Crankset: Thesis hollow forged aluminum, 44t Narrow-Wide profile
Brakes: SRAM Force HRD, SRAM Centerline rotors 160mm front, 160mm rear
Cockpit: Thesis 10cm stem, 42cm flared bar
Seatpost: Thesis Aluminum dropper, internal cable routing , 27.2mm, two-bolt clamp
Saddle: Thesis ergonomic
Wheels: Thesis 650b rim, 27.4mm internal width, Centerlock disc hubs, j-bend bladed spokes, external nipples
Tires: WTB Byway tubeless, 650b x 47mm
Warranty: Five years, frame and fork (original owner)
Country of origin: Taiwan
More Info: thesis.bike

Photo Gallery: Thesis OB1 All-Road Bike

Our demo bike was set up with 650b road-plus tires and a dropper post. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine

Our demo bike was set up with 650b road-plus tires and a dropper post. Thesis OB1 Do-It-All Carbon Bike. © C. Lee / Cyclocross Magazine

The post Ridden and Reviewed: Thesis OB1 Carbon All-Road Bike appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Easton Adds Vault Hub to EC90 SL and EC90 AERO55 Tubeless Wheelsets

$
0
0

Easton's EC90 SL tubeless disc clincher with the Pivot hub

Last year, Easton Cycling announced the release of its new Vault hub that uses larger bearings and a wider bearing stance.

Today, Easton announced that the Vault hub is coming to its EC90 SL and EC90 AERO55 carbon tubeless clincher wheelsets.

EC90 SL Wheelset

Easton's EC90 SL tubeless disc clincher with the Pivot hub

Easton’s EC90 SL tubeless disc clincher with the Vault hub

At last year’s Dirty Kanza 200, we saw Amanda Nauman and Michael van den Ham use the EA90 SL wheels during the 206-mile race, so the rim design is up to one of the toughest challenges out there.

The EC90 SL wheelset is road, cyclocross and gravel ready with a 19mm-wide (internal) width. The wheels are medium-depth, with a rim that is 38mm deep. While 19mm isn’t super wide by today’s standards, it was one of the widest options when we first saw the tubeless disc version in 2015.

Easton updated the rim design, but still builds them with the Fantom rim profile.

Easton now builds the wheels with its Vault hubs, which are Centerlock disc. The freehub is SRAM/Shimano, XDR and Campy compatible.

The wheels are laced 3x with 24 spokes front and rear with Sapim straight-pull CX-Ray spokes.

The Easton EC90 SL wheelset is ready for both cyclocross and gravel.

The Easton EC90 SL wheelset is ready for both cyclocross and gravel.

The carbon wheelset weighs a claimed 1,485g, which is 52g lighter than the EA90 SL disc wheelset.

The EC90 SL wheelset costs $2,000, and it comes with Easton’s two-year Carbon Confidence guarantee.

Cost: $2,000 USD
Weight: 1,485g (claimed)
Rim: EC90 carbon tubeless clincher
Rim Width: 19mm (internal), 28mm (external)
Rim Depth: 38mm
Spokes: 24, front and rear, Sapim CX-Ray straight-pull
Hubs: Easton Vault
Rotors: Centerlock disc
More Info: eastoncycling.com

EC90 AERO55

Easton's EC90 AERO55 carbon Road Tubeless clincher with Pivot Vault hub

Easton’s EC90 AERO55 carbon Road Tubeless clincher with Vault hub

The EC90 AERO55 wheelset with Easton’s Road Tubeless rim returns with the new Vault hub.

The wheelset is 55mm deep and has an internal width of 19mm.

Easton's EC90 AERO55 rims shed weight and the wheels gained the Vault hub.

Easton’s EC90 AERO55 rims shed weight and the wheels gained the Vault hub.

The new wheels shed some weight with the upgrade, dropping to a claimed 1,545g (from 1,630g).

The EC90 AERO55 wheelset with Vault hubs costs $2,050 USD. It also comes with Easton’s two-year Carbon Confidence guarantee.

Cost: $2,050 USD
Weight: 1,545g (claimed)
Rim: EC90 carbon Road Tubeless clincher
Rim Width: 19mm (internal), 28mm (external)
Rim Depth: 55mm
Spokes: 24, front and rear, Sapim CX-Ray straight-pull
Hubs: Easton Vault
Rotors: Centerlock disc
More Info: eastoncycling.com

The post Easton Adds Vault Hub to EC90 SL and EC90 AERO55 Tubeless Wheelsets appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Gravel Race: Illinois’ Rough Road 100 Brings Spring Classics to the Midwest

$
0
0

The Rough Road 100 course is relatively flat, and yes, there is plenty of corn to be seen. 2019 Rough Road 100 Gravel Race. © Craig Patnode

When you dub your race the Midwest Spring Classic, you better have a race that backs up the claim.

Illinois’ Rough Road 100 does just that by breaking down its gravel route into nine rough-road sectors, much like this coming weekend’s Paris-Roubaix does.

Now in its fifth year, that the race is set up like a spring classic is no mistake.

“I used to ride the roads growing up and always enjoyed the Euro Spring Classics, put the two together, in my mind at least, and here we are,” race director Craig Patnode said.”

Instagram Photo

The Rough Road 100 is based in the Illinois River town of Morris, which is about an hour southwest of Chicago.

The “100” stands for 100 kilometers, and there is a shorter 64 km route offered as well. According to Patnode, the route is about 65 percent pavement and 35 percent gravel, making it spring-classic-like.

“The gravel disappeared a lot since I was younger, but the setup in this area lends itself to our Spring Classic style,” Patnode said.

Earlier this spring, we covered the rather hilly Dirty South Roubaix in southern Dirty South Roubaix in southern Illinois Morris is in the part of Illinois flattened by glaciers, so the Rough Road 100 route is much flatter, as one might expect for Illinois.

The route does pass through the Illinois River valley two times, giving riders some elevation to deal with.

“For us about, 1,300 feet of climbing, it would be hard to find much more,” Patnode said. “I feel some climbs are deceptive. There are a couple of punchy ones that could give someone a break if they were willing and some longish ones that are exposed so you hope for no wind. But yes, I’d agree, mostly flat!”

The Rough Road 100 course is relatively flat, and yes, there is plenty of corn to be seen. 2019 Rough Road 100 Gravel Race. © Craig Patnode

The Rough Road 100 course is relatively flat, and yes, there is plenty of corn to be seen. 2019 Rough Road 100 Gravel Race. © Craig Patnode

As mentioned above, the race advertises nine gravel sectors that help give the race its Rough Road name. The last sector is a nearly 13-kilometer drag to the finish line that can get kind of gnarly during a wet spring.

Unfortunately, not on the route anymore is what was once the toughest of them all.

“After Year 2, one of the municipalities put fresh gravel over, unquestionably, the toughest sector,” Patnode said. “That being Mine Road, so that was a bit of a bummer. They all present certain challenges being spring because you don’t know what the melt off will uncover.”

Even though the toughest sector has been removed, there is still plenty of gravel on the RR100 course. 2019 Rough Road 100 Gravel Race. © Craig Patnode

Even though the toughest sector has been removed, there is still plenty of gravel on the RR100 course. 2019 Rough Road 100 Gravel Race. © Craig Patnode

The Race

The 2019 Rough Road 100 took place on Saturday. The race offers 100 km Open and 64 km Open categories as well as a USAC 100 km Open race.

Nearly all gravel events we have covered have done their best to stay away from the USAC designation, but Patnode said his team did not see a problem going that route.

“We wanted to expand what we were after, knowing that the Rough Road 100 is pretty unique in our space. A lot of people wouldn’t consider us a strict gravel event and we’re good with that, we just want people to ride or race and have fun doing it.”

Equal payouts went to the top three women and men finishers in both the USAC and Open categories.

In the Women’s USAC race, Madison’s Kaitlin Agnew took the win. 2017 Masters Cyclocross national champion2017 Masters Cyclocross national champion Sydney Guagliardo finished second, and Allison Schroeder (PSIMET Racing) finished third. Anna Ganju (Collective Coffee) and Lauren Wiscomb (Bonkers Cycling) rounded out the wide-angle podium.

For the men, Spencer Seggebruch (Pastaria – Big Shark Racing) headed north from St. Louis to get the win. Tim Strelecki (Franco Factory Racing p/b Brightleaf) finished second and Rory Jack (Velosmith Bicycle Studio) took third. Tim Doelman (fairlife) and Tom Keller (Bloomington Cycle and Fitness) rounded out the wide-angle podium.

Another result of note is Laurel Rathbun’s win in the Women’s Open 100 km race.

Results for the USAC category are below. Full results for all categories are can be seen here.

Photos by Robotfresh are available from the race.

Women's USAC Results: 2019 Rough Road 100

PlaceNameHometownTeamTime
1KAITLYN AGNEWMADISON2:48:51
2SYDNEY GUAGLIARDOBARRINGTON3:05:14
3ALLISON SCHROEDERCHICAGOPSIMET Racing3:05:28
4ANNA GANJUNEW BERLINColectivo Coffee3:10:07
5LAUREN WISCOMBCHICAGOBonkers Cycling3:10:31
6LEAH SANDAWESTERN SPRINGSPSIMET Racing3:17:15
7LINDSAY KNIGHTCHICAGOTenSpeedHero3:19:02
8KATHERINE GRAHAMGRANVILLEEliel Factory Team3:27:32
9MONA KUNANAPERVILLEAthletes By Design3:28:08
10CAROLINE RODRIGUEZ-NELSONOAK PARKIntent3:39:47
11MARY ANN SEDORWARRENVILLEIntent3:50:34
12LORRAINE MCCARTHYVERNON HILLSForce Power Racing4:19:34

Men's USAC Results: 2019 Rough Road 100

PlaceNameHometownTeamTime
1SPENCER SEGGEBRUCHSAINT LOUISPastaria - Big Shark Racing2:39:09
2TIM STRELECKIGENEVAFranco Factory Racing p/b Brighteaf2:39:17
3RORY JACKCHICAGOVelosmith Bicycle Studio2:39:23
4TIM DOELMANGLENCOEfairlife2:39:26
5TOM KELLERBLOOMINGTONBloomington Cycle and Fitness2:39:27
6EVAN BLANKENSHIPSAINT LOUISPastaria - Big Shark Racing2:39:30
7GERALD ADASAVAGEBROOKLYN2:39:31
8ROSS TUNEBERGROCKFORDXXX Racing2:39:32
9SEAN METZPLAINFIELDXXX Racing2:39:32
10NATHAN SHAWBLOOMINGTONBloomington Cycle and Fitness2:39:32
11JIMMY PANTHERMILWAUKEEMoMo Riders Club2:39:32
12DOMINIC LOPEZCHICAGOWOLFPACK Bike Racing2:39:33
13ANDERSON BORTOLETTOMC FARLANDLAPT Cycling Team2:39:34
14GREG SPRINGBORN2:39:36
15DANIEL BREUERCHICAGOXXX Racing2:39:41
16THOMAS KEHRERCHICAGOBonkers Cycling2:39:44
17CARL VALENTINCHICAGOHalf Acre Cycling2:39:50
18SCOTT OGILVIESAINT LOUISRise Above Cycling2:39:57
19SERGEY KLIBANOVDOWNERS GROVEWOLFPACK Bike Racing2:39:09
20NEAL MCNAMARACHICAGOBurnham Racing2:40:20
21JACOB GLAHNMADISONTrek Midwest Team2:40:36
22TIM PIGULACHICAGOXXX Racing2:41:12
23JOHN WHIPPLECHICAGO2:41:12
24MARC MOELLERELGINTeam Bicycle Heaven2:41:14
25HAYDEN WARNERNEOGASLF Motion2:41:22
26CHRISTOPHER YOUNGCHICAGOChampion System2:41:26
27MICHAEL LANYONCHICAGOBurnham Racing2:41:42
28MIKE WOLFORDBLOOMINGTONBloomington Cycle and Fitness2:42:47
29BRANDON CONINECHICAGOUPB Cycling2:43:02
30WALID ABU-GHAZALEHCHICAGOPony Shop2:44:06
31CRAIG COOPERCLAYTONCraig Cooper2:46:18
32PETER CHERCHIANSUN PRAIRIENeff Cycle Service2:46:40
33CHRIS DANIELSBLOOMINGTONBloomington Cycle and Fitness2:46:40
34DANNY WARNERTROUT VALLEYF3 Cycling p/b 7Mile Cycles2:48:13
35BRYAN DOBESGLEN ELLYNWOLFPACK Bike Racing2:48:29
36DEVIN CLARKSAINT LOUISPastaria - Big Shark Racing2:48:47
37PATRICK COWLINCHICAGOThe Chainlink2:48:48
38ZACHARY WEIDENAARLANSINGPSIMET Racing2:48:48
39BRIAN KULAKPLAINFIELDWOLFPACK Bike Racing2:48:50
40BOBBY MORALESCHICAGOBonkers Cycling2:48:52
41TOM STUTESMANCHICAGOXXX Racing2:48:57
42MARK NOWACKPLAINFIELDFranco Factory Racing2:49:01
43MARK KITRALLAKE ZURICHF3 Cycling pb 7 Mile Cycles2:49:17
44JACK THORNBURGCHICAGOBonkers Cycling2:49:26
45ZACHARY SLAVENSORLAND PARKTeam Veloz2:49:33
46MARK SAVERYOMAHAFactor Bikes2:50:23
47JUAN ESTEBAN TAPIERO BERNALMILWAUKEEBelgianwerkx2:50:54
48BRAD MENNAWILMETTEFairlife2:51:26
49PJ CAVATO2:51:28
50ROB JACOBSENCHICAGOIntent2:53:45
51JARED VERBEKECHICAGOXXX Racing2:54:09
52BRAD DASHBATAVIAABD CYCLING2:54:13
53STEPHEN FARRCHICAGOMajor Taylor Chicago2:54:17
54SCOTT BOWDENSUGAR GROVETeam Bicycle Heaven2:54:17
55BRIANT KELLYLIBERTYVILLEIntent2:54:22
56SANJAY GANJUNEW BERLINTrek Midwest Team2:54:22
57LARRY GELWIXWILMETTEVelosmith Bicycle Studio2:54:22
58MICHAEL VAILWESTMONT2:54:33
59MITCH STAUFFERNAPERVILLETower Racing2:56:16
60KELLY SHURILLAMILWAUKEE2:56:25
61JEFF HOLLANDCHICAGOThe Bonebell2:56:28
62WOJCIECH CZERKIESPALATINEPLUS Cycling Team2:57:29
63BEN SIVERCHICAGOBonkers Cycling2:57:29
64TONY RIENKSCHICAGOBeverly Bike Racing Team2:57:32
65NATHAN TROIAWHEATONTeam Bicycle Heaven2:57:33
66JEFFREY HANSENCHICAGOPYOC2:58:43
67THOMAS WALLACENORMALBloomington Cycle and Fitness2:58:49
68THOMAS KRAMERBUFFALO GROVEF3 Cycling pb 7 Mile Cycles2:58:54
69BILL PERRYNORMALBloomington Cycle and Fitness2:58:55
70MARCUS BICKFORDMILWAUKEEVelocause Centraal Cycling2:59:01
71FRANK LOFRANOARLINGTON HEIGHTSRIntent3:00:04
72THOMAS TITTELBACHBOLINGBROOK3:00:26
73EDUARDO MOLINACHICAGOVision Quest3:00:39
74ED GROSSCHICAGOSRAM Factory3:00:57
75LINCOLN ELLISCHICAGORapha Cycling Club3:00:58
76KEVIN KRAKOVSKYCHICAGOXXX Racing3:00:59
77STUART NELSENOAK PARKUPB Cycling3:04:10
78PETER PAVEKCHICAGO3:05:14
79SEAN SEAMON3:06:43
80PAOLO URIZARCHICAGO3:10:05
81JOE LUNIAKKILDEERVision Quest3:10:52
82RENE \ CERVANTESCHICAGOKlick3:12:35
83BEN CONNORNAPERVILLE3:15:06
84JERRY MEISTERELBURNABD CYCLING3:15:56
85ANDREW RIZZOLISLEFairlife3:16:32
86JOE SCHUBERTEVANSTONSuper Ape3:17:20
87MICHAEL KIRBYCHICAGOXXX Racing3:17:58
88ERIC STUCKCHICAGOPSIMET Racing3:19:14
89MICHAEL KURTZLISLEMilitary Endurance Sports3:23:14
90JACOB HUIZENGACHICAGOCHICAGO CUTTIN CREW3:24:08
91JOHN WALBAUMCHICAGOSouth Chicago Wheelmen3:24:22
92JOHN ORLEANSCHICAGOHalf Acre Cycling3:28:55
93CHAD BRIGGSWEST DUNDEEChristian Cycling Club3:30:55
94ELLIOT THOMPSONNEW ALBANY3:31:53
95MATT HOLTWILMETTEUnion3:34:42
96MICHAEL PATTONCHICAGOBonkers Cycling3:34:42
97AVERY YOUNGCHICAGOTeam Veloz3:43:56
98GARY KULADOWNERS GROVEAthletes By Design3:47:25
99KEVIN ONEILLCHICAGOXXX Racing3:50:23
100MARK WILSONHIGHWOODThe Chainlink4:00:29
101ANTHONY HOAKMILWAUKEE5:09:09
102DAVID REYESCHICAGO
103PAUL SWINANDEVANSTONBicicletta

The post Gravel Race: Illinois’ Rough Road 100 Brings Spring Classics to the Midwest appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Viathon Launches New Direct-to-Consumer G1 Carbon Gravel Bike

$
0
0

The G1 is a new direct-to-consumer gravel bike. Viathon G1 Gravel Bike Launch

Over the past several years, Canyon Bikes has gotten attention for its direct-to-consumer model that allows it to sell high-end bikes at competitive price points.

Today, Viathon launched as a new direct-to-consumer carbon bike company. Viathon’s staff is made up of bike industry veterans, and the company has partnered with Kevin Quan Studios for its design and engineering.

The company’s launch includes three bikes: the G1, R1 and M1 for, aptly, gravel, road and mountain biking, respectively.

We take a first look at the Viathon G1 available in three different builds ahead of the 2019 Sea Otter Classic trade show.

[caption id="attachment_133573" align="aligncenter" width="900"]The G1 is a new direct-to-consumer gravel bike. Viathon G1 Gravel Bike Launch The G1 is a new direct-to-consumer gravel bike. Viathon G1 Gravel Bike Launch[/caption]

Viathon G1 Gravel Bike

The G1 gravel bike has a carbon frame that boasts a claimed sub-1,000g weight, and a carbon gravel fork that is flat mount disc. The frame includes an oversized bottom bracket for increased stiffness and internal cable routing throughout.

[caption id="attachment_133570" align="aligncenter" width="900"]The G1 features an oversized BB for increased stiffness. Viathon G1 Gravel Bike Launch The G1 features an oversized BB for increased stiffness. Viathon G1 Gravel Bike Launch[/caption]

Similar to most gravel bikes these days, the G1 has rear rack and fender mounts and mounts for bags or a rack on the fork.

The geometry on the G1 is similar to an all-road bike, with a 72-degree head tube angle on a 56cm frame. The BB drop is 6.9cm, the chainstays are 42.5cm long and the wheelbase comes in at 102.4cm. The stack on the 56cm frame is 58.2cm and the reach is 38.8cm.

Like other gravel bikes we have seen, the Viathon G1 uses a dropped drive-side chainstay for more tire clearance. Viathon claims clearance for 700c x 51mm and 650b x 53mm tires.

[caption id="attachment_133571" align="aligncenter" width="1140"]The G1 gravel bike has a dropped chainstay for increased clearance. Viathon G1 Gravel Bike Launch The G1 gravel bike has a dropped chainstay for increased clearance. Viathon G1 Gravel Bike Launch[/caption]

The G1 comes in three builds. The G1 Force is $3,550, the G1 Ultegra is $3,300 and the G1 105 is $2,300. The frameset alone costs $2,000.

[caption id="attachment_133574" align="aligncenter" width="900"]The highest-end build of the G1 has a SRAM Force 1 drivetrain. Viathon G1 Gravel Bike Launch The highest-end build of the G1 has a SRAM Force 1 drivetrain. Viathon G1 Gravel Bike Launch[/caption]

The brakes on all three models are hydraulic disc.

Each build comes with HED Ardennes LT alloy tubeless clinchers that have a claimed weight of 1,549g. The bikes ship with 700c x 35mm Continental CycloX King tires, which is a curious choice since the tires have been discontinued and are a folding bead clincher.

[caption id="attachment_133586" align="aligncenter" width="1140"]The G1 Force comes with Continental CycloX King folding-bead tires and HED Ardennes alloy tubeless clinchers. Viathon G1 Gravel Bike Launch The G1 Force comes with Continental CycloX King folding-bead tires and HED Ardennes alloy tubeless clinchers. Viathon G1 Gravel Bike Launch[/caption]

For more on the new bikes, see the specs for the G1 Force and photo gallery below.

Viathon G1 Force Gravel Bike Specs

Price: $3,550
Shift/Brake Levers: SRAM Force HRD
Calipers: SRAM Force HRD
Crankset: SRAM Force 1
Chain Ring: SRAM X-Sync, 42t
Rear Derailleur: SRAM Force 1
Cassette: SRAM PG-1175, 10-42t
Wheels: HED Ardennes LT, alloy tubeless clincher
Tires: Continental CycloX King, folding bead, 700c x 35mm
Handlebar: Zipp Service Course SL-70
Stem: Zipp Service Course SL 81
Seatpost: Zipp Service Course SL 81, zero offset
Saddle: Fizik Aliante R3
More Info: viathonbicycles.com

Photo Gallery: Viathon G1 Carbon Gravel Bike

The G1 is a new direct-to-consumer gravel bike. Viathon G1 Gravel Bike Launch

The G1 is a new direct-to-consumer gravel bike. Viathon G1 Gravel Bike Launch

The post Viathon Launches New Direct-to-Consumer G1 Carbon Gravel Bike appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Race New York’s Durty Bikes Gravel Series with JPow, Anthony Clark this Spring

$
0
0

SWAIN, NY—Registration is now open for the East Coast’s premier gravel races series. The Durty Bikes Gravel Series (formerly the Mudslinger Gravel Series) presented by Van Bortel Ford is raising the bar for 2019 with three epic gravel adventures featuring top name pros, amazing courses, lots of swag and awesome cycling parties.

Join Jeremy Powers and Anthony Clark at Race #1: The Ossian Giant Gravel Grinder, April 13 and follow it up with a Recovery Ride with JPOW (4/14) to benefit local Junior development.

Join Jeremy Powers for the first race of the Durty Bikes Gravel Series in April. photo: courtesy

Join Jeremy Powers for the first race of the Durty Bikes Gravel Series in April. photo: courtesy

Then join Clark the following weekend, April 20, for the Prattsburgh Gravel Classic, New York’s oldest Spring Classic, for Round 2 of the series before hitting a new Championship Race, The Hills of High-Tor, hosted by Park Ave Bike Team on May 5.

Register for the full series or Saturday’s Ossian Giant Gravel Grinder.

Anthony Clark will be back at the Durty Bikes Gravel Series this season. photo: courtesy

Anthony Clark will be back at the Durty Bikes Gravel Series this season. photo: courtesy

New for 2019 we are offering a 35-Plus and 60-Plus Masters Fields as well as a new course at the Giant and tons of prizes from Once Again Nut Butter, Castelli, SockGuy and custom made awards.

For more details visit our website at ridelcc.com. Follow us on Instagram @onceagain racing and Facebook @durtybikes

Sponsors include: American Rock Salt, Once Again Nut Butter, Swain Resort, Cyclepath, Castelli, Van Bortel Ford, Van Allen and Hoffmann, Aloi Materials, Gnarly Monkey.com, Dansville Collision, Cycle Craze, Silver Lake Brewing Project, Timmermade, Nunda Lumber, Bridgett C. Hoag Empire Realty, Geneseo Chiropractic, Finger Lakes Cookie Company, Tompkins Bank of Castile, Livingston Cycling Club, and NYSBRA.

The post Race New York’s Durty Bikes Gravel Series with JPow, Anthony Clark this Spring appeared first on Cyclocross Magazine - Cyclocross News, Races, Bikes, Photos, Videos.

Viewing all 832 articles
Browse latest View live